Bedienungsanleitung Kress 900 hex (Seite 10 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

390125

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

10 English 900 HEX/2

Before any work on the machine itself, pull the

mains plug!

Selecting the rubber backing pad

The eccentric sander is fitted with an all-purpose

rubber backing pad of medium hardness. However,

rubber backing pads with varying degrees of hard-

ness may be fitted, depending on the type of applica-

tion (see application table):

Super-soft backing pad:

Suitable for polishing large surfaces and for particu-

larly sensitive sanding work (also curved surfaces).

Soft rubber backing pad:

All-purpose, suitable for all sanding work.

Hard rubber backing pad:

Suitable for high sanding performance, particularly on

large, flat surfaces.

Fitting the sanding tools (Fig. C)

The machine is fitted with a quick-change (connecting

link) system, enabling sanding tools to be changed

easily without the aid of an additional tool.

Before mounting any new sanding sheets 16, dust

and dirt must be removed from the backing pad 12.

Press the sanding sheets or polishing tools onto the

backing pad and make sure that the bore holes of the

sanding sheet match the bore holes on the backing

pad.

Only use original Kress sanding and polishing

tools with the pressure-sensitive connecting link.

Changing the rubber backing pad (Fig. C)

For changing the backing pad 12, remove it from its

carrier plate 15.

Damaged rubber backing pads must be replaced

immediately.

Changing the backing pad carrier plate

(Fig. D)

When changing the backing pad carrier plate 15, pull

off the sanding sheet or polishing tool, respectively.

Loosen screw 17 with a Torx screwdriver and remove.

Hold the backing pad carrier plate 15 firmly and

tighten the screw 17 firmly with a Torx screwdriver.

Dust extraction prevents large accumulations of dust,

high concentrations of dust in the ambient air and

facilitates disposal.

For long periods of working with wood or for commer-

cial use on materials that produce dust that is detri-

mental to health, the machine is to be connected to

a suitable external dust extraction device.

Adapter for vacuum cleaner connection

The adapter enables the sanding dust to be vacu-

umed using a normal household vacuum cleaner.

The rubber reducer can be used for reducing the con-

nection diameter on the diameter of the vacuum

cleaner tube.

Mounting the dust bag (Fig. B)

For smaller sanding jobs the dust bag supplied with

the machine can be used for dust extraction. The

machine has its own effective dust extraction facility

with integrated suction turbine and dust bag.

Push the dust bag with the locking connection 14 from

behind onto the mounting on the blower flange and

press it on. The locking connection engages by spring

pressure.

The dust bag can be taken off by pulling the moulded-

on grip.

The dust bag must be emptied as soon as the suction

strength slackens. To do this, pull the clamp off in the

direction of the arrow and push it on again after emp-

tying.

Sanding surfaces

Only perfect sanding sheets will give a good sanding

performance and protect the machine.

Observe uniform feed. Less contact pressure gives

a better sanding performance and protects the

machine and sanding tools.

Different rubber backing pads and sanding wheels

should be used depending on the material.

The abrasive power and the sanding finish are deter-

mined primarily by the choice of sanding disc (grain),

speed of the rubber backing pad and contact pressure

(ssee application table).

Place the whole sanding area of the eccentric disc

sander onto the material which requires sanding.

Switch on the machine and move over the work-piece,

applying moderate pressure.

8 Inserting/Removing Tools 9 Dust extraction device

10 Practical Tips

900 HEX/2 - Buch Seite 10 Dienstag, 27. Juni 2000 8:06 08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress 900 hex Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info