Bedienungsanleitung Kress 900 hex (Seite 11 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

390125

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

900 HEX/2 English 11

Sanding application table

The following table should only be used as a recom-

mendation. The most suitable combinations are best

determined by carrying out a practical test.

Coarse sanding

Attach a coarse grain sanding disc. Only apply light

pressure to the eccentric disc sander, so that the

rubber backing pad runs at a higher speed, thereby

removing a greater quantity of the material.

Precision sanding

Attach a sanding disc which has a finer grain. The

speed of the rubber backing pad can be reduced by

lightly varying the contact pressure, as a result of

which the eccentric movement of the sander is

retained and the sanding finish is equivalent to that

produced by a vibrating sander.

Move the eccentric sander in a circular motion, paral-

lel to the material, or move the sander in alternating

lengthwise and crosswise directions.

Do not tilt the eccentric disc sander, otherwise the

sander may sand through the work-piece (e. g.

veneer).

On completion of work, reduce the rubber backing pad

speed by removing the contact pressure and lift

machine off the workpiece.

Polishing

For polishing weather-beaten paintwork or for touch-

ing-up scratches, (e. g. acrylic glass) the eccentric

disc grinder can be fitted with the appropriate polish-

ing tools, for example, a lamb’s wool attachment or

a polishing felt/sponge (auxiliary).

Select low speed for polishing (step 1–2) in order

to avoid excess heating of surface.

Attach the polishing sponge to the rubber backing

pad.

Apply polish to the location which requires polishing.

Work in the polish, applying moderate pressure,

in a crosswise or circular motion and then allow to dry

slightly.

Mount the lamb’s wool disc attachment onto the back-

ing pad.

Polish up the dried polish in a crosswise or circular

motion.

In order to achieve optimum polishing results, the pol-

ishing tools must be cleaned regularly. It is recom-

mended to wash the polishing tools with a mild deter-

gent and warm water (do not use diluting agents).

Before any work on the machine itself, pull the

mains plug!

Always keep the ventilation slots clean.

Wipe off the accessible plastic parts regularly with

a cloth without cleaning agent.

The rubber seal 18 protects the drive against any dirt

and thereby also from increased wear and a shorter

service life of the drive parts.

The rubber seal must therefore be checked regularly

for damage. If the seal is damaged the machine

should be taken to a Kress after-sales service station.

After heavy use over a long period, the machine

should be taken to a Kress service location for an

inspection and thorough cleaning.

Kress takes back worn-out machines

for the purpose of resource-saving

recycling. As a result of their modular

construction, Kress machines can be

very easily dismantled into their reusa-

ble materials.

Give your worn-out Kress machine to your dealer or

send it directly to Kress.

Subject to change without notice

Material Grain Switchset Rubber-

backing

Coarse

sand-

ing

Preci-

sion

sanding

Light sanding

of pw.

Smoothing

out paintw.

Removing

paintwork

180

120

400

240

2/3

4/5

soft

hard

soft

Soft wood

Hard wood

Veneer

240

180

320

5/6

super-soft

soft

super-soft

Aluminium

Steel

Derusting steel

Stainless steel

120

240

120

240

4/5

soft

soft/

hard

super-soft

soft

ALU

METAL

11 Maintenance Measures

12 Environmental Protection

900 HEX/2 - Buch Seite 11 Dienstag, 27. Juni 2000 8:06 08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress 900 hex Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info