Bedienungsanleitung Krups EA 8050 (Seite 9 von 16) (Englisch)

111147

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Caution! To beneﬁt from the guarantee conditions, it is essential to perform the appliance cleaning cycle when

informed to do so. Be sure to follow the procedure closely, step by step.

You can continue to use the appliance when the light is on, but you are advised to perform the program as soon as

possible.

Press the

button to start up the cleaning program. The ‘

CLEAN

’ and ‘ ’ lights will ash.

Remove and clean the cleaning tray then t it again

- Fig. 23

Empty and clean the coffee grounds collector then t it again

- Fig. 24

. The ‘ ’ light will go off.

Remove and empty the drip tray

- Fig. 25

Remove, ll and re-t the water tank.

Place a receptacle with a minimum capacity of 0.6 l under the coffee outlets

- Fig. 26

Open the servicing ap and insert a KRUPS cleaning tablet (XS3000) in the cleaning inlet

- Fig. 27

Press the button to start up the cleaning program.

1 - Cleaning cycle ± 10 mn

The ‘

CLEAN

’ light becomes steady. The cleaning cycle will be run automatically. The pump sucks up water

intermittently. This operation lasts about 10 minutes and the ‘

CLEAN

’ light will ash again.

Empty your waste water receptacle and put it back under the coffee outlets.

Again press the button to start the rst rinsing cycle.

2 - Rinsing ± 3 mn

The ‘

CLEAN

’ light will become steady again. The program continues. A rst rinsing cycle will be run automatically.

It allows the appliance to be rinsed and remaining detergent to be eliminated. This rst rinsing cycle lasts about

3 minutes and once nished the ‘

CLEAN

’ light will ash again.

Remove and empty your waste water receptacle.

Empty the drip tray and t it again.

Fill your water tank.

Your appliance will be ready for use again.

Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage that may result from the use

of tablets from other brands.

You can obtain cleaning tablets from KRUPS Service Centres.

Scale removal program – total duration: about 20 minutes.

The quantity of scale deposited depends on the hardness of the water used. The appliance will automatically warn you by

the ‘

CALC

’ light coming on when you need to proceed with scale removal.

This program is only accessible when the machine requests it.

Caution! To beneﬁt from the guarantee conditions, it is essential to perform the appliance scale removal

cycle when informed to do so. Be sure to follow the procedure closely step by step.

You can continue to use the

appliance when the light is on, but you are advised to perform the program as soon as possible.

If your appliances ﬁtted with our Claris - Aqua Filter System F088 cartridge, please remove the cartridge

during the descaling operation.

Make certain to protect your work surface during cleaning and scale removal cycles, especially if it is made

of marble, stone or wood.

Press the key to start up the scale removal program. The ‘

CALC

’ and ‘ ’ lights will ash.

Remove and clean the drip tray.

Place a receptacle with a minimum water capacity of 0.6 l under the coffee outlets and under the steam nozzle.

Empty the tank and ll it with lukewarm water up to the ‘

CALC

’ marking.

Dissolve a sachet of

Krups

scale remover

F054

(40 g).

Only use KRUPS scale removal products. You can obtain scale removal products from KRUPS Service Centres.

The manufacturer may not be held responsible for damage to the appliance through use of other products.

Put the water tank back in place. The ‘ ’ light turns off and the ‘

CALC

’ light stops blinking.

If there is not enough water in the water tank when you start the program, the ‘ ’light will come on to warn you.

Add the appropriate amount of water to the container and cleaning will continue automatically.

If your machine is unplugged during cleaning or in the event of power failure, you will have to restart the cleaning

program right from the start. This is essential due to water circuit rinsing reasons. In this case, you will need to use

another cleaning tablet. Be sure to complete the entire cleaning cycle to avoid any risk of irritation (seek medical

advice if cleaning solutions are accidently swallowed.

The cleaning cycle is a continuous cycle. Do not put your hands under the coffee outlets during the cycle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups EA 8050 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Krups EA 8050

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info