Basic settings
Timer
The timer functions like an egg timer. It can be used at any time and independently of all other functions.
To set the Timer proceed as follows:
1. Press the “On/Off” key to switch the oven on.
2. Press the “Time” function key.
3. Press the “-” and “+” keys navigate to the
“Timer” function.
4. With the “OK” key confirm the selected function
5. Press the “–” and “+” keys to set the desired time.
6. Press the OK key to validate. The timer will start
to countdown.
When the set time has elapsed the oven will emit three
beeps that will be repeated every 30 seconds and the
Timer key will flash. Press the “Time” key .to cancel
the beeps.
While the Timer is running the Timer light is on. The
display and lights show the following:
1. If there is no active function the display shows the
Timer counting-down and the Timer key is red.
2. If there is an active function, the display and keys
show the normal function parameters. To check the
Timer’s remaining time press the Timer key. The display
will briefly show the Timer and resume the function
indications after 5 seconds or once the Timer key is
pressed again. While the Timer is shown the remaining
time can be changed with the “–” and “+” keys as
described above.
