Bedienungsanleitung Kyocera FS9500DN (Seite 27 von 143) (Englisch)

20433

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

Chapter 3 Using the Operator Panel

3-11

Items and values on the status page may vary depending on the

printer’s firmware version.

1 Software Version

This information shows the firmware version and date of is-

sue of the printer.

2 Hardware Information

This information shows various printer settings, such as the

size and type of the paper in the paper cassettes.

3 Memory

This shows the amount of total memory installed in the print-

er, the amount of currently available memory, and the current

status of the RAM disk. See Setting RAM Disk Size on

page 3-34.

4 Page Information

This shows the print resolution, number of copies, and the to-

tal page count.

5 Installed Options

This shows the option(s) installed in the printer.

6 Network Status

This shows the IP address, Subnet Mask address, and De-

fault Gateway address for the network interface.

7 Emulation

This shows all available emulations of the printer. The printer

is shipped from the factory with PCL 6 emulation selected as

the default.

8 Error Log

This shows the last three instances of the following four

types of errors, listing them in the order of their occurrence:

KPDL Error Press GO; Memory overflow Press GO;

Print overrun Press GO; File not found Press

GO. The most recent error is displayed on the top line of the

Error Log. For error remedies, see Maintenance Messages

on page 4-4. Error information is cleared when the printer’s

power is turned off.

9 Toner Gauge

This shows the approximate level of remaining toner. When

the value is 100, the toner container is full.

0 Interface Information

This information shows the default font and the default emu-

lation for all interfaces installed in the printer.

A KIR Test Pattern

KIR is the Kyocera’s original smoothing function. This test

pattern shows the effect of the KIR (Kyocera Image Refine-

ment) system.

2.2.3 e-MPS

e-MPS is an abbreviation for ‘enhanced-Multiple Printing Sys-

tem’ which implements the following functions that are available

from the printer driver:

• Job Retention

• Job Storage

In either job mode, when printing a document, the print data is

transferred from the computer to the printer then stored on the

printer’s hard disk. Since copies of the document are printed us-

ing the stored data, printing is performed faster with less compu-

ter spooling time and less network traffic.

To use the e-MPS system, an optional hard disk must be in-

stalled in the printer. For details, see Appendix D Option

Units.

Q Job Retention

Job Retention has four modes as summarized below. These

modes are selected when you choose on the printer driver

through the application software:

*Jobs in excess will cause the earlier ones to be deleted.

NOTE

Quick Copy Proof-and-Hold

Primary function To later print addi-

tional copies

To proof the first

copy before printing

multiple copies

Storing started Printer driver Printer driver

Retrieved by Operator panel Operator panel

Default number of

copies printed at re-

trieval

Same as storing One less

Maximum number

of jobs stored*

32,expandable to

PIN security No No

Data after printing Retained Retained

Data when power

off

Deleted Deleted

Private Print Stored Job

Primary function To hold the docu-

ment in printer to

prevent unauthor-

ized access

To electronically

store documents

such as fax cover

pages

Storing started Printer driver Printer driver

Retrieved by Operator panel Operator panel

Default number of

copies printed at re-

trieval

Same as storing One

Maximum number

of jobs stored*

Private jobs are de-

leted automatically

once it is retrieved.

Depends on the

hard disk capacity

PIN security Yes Yes (Option)

Data after printing Deleted Retained

Data when power

off

Deleted Retained

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS9500DN Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info