Bedienungsanleitung Kyocera FS9500DN (Seite 28 von 143) (Englisch)

20433

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

Chapter 3 Using the Operator Panel

3-12

Q Job Storage

Job storage stores print jobs either temporarily or permanently,

or in virtual mailboxes, as you click an appropriate radio button

on the printer driver when printing from a computer. If you select

Temporary or Permanent job storage, you can choose to have a

unique number and barcode automatically assigned to each job

as it is stored in the printer. This barcode appears on the printed

document. The barcode reader can be used to reprint the docu-

ment by reading the barcode from the original document or from

a List of Code Jobs. For details on this list, see Printing a List of

Code Jobs on page 3-15.

Job storage requires a hard disk installed in the printer. Howev-

er, printing barcoded job IDs on documents is possible using the

RAM disk feature of the printer. On how to use the RAM disk, see

Operating a RAM Disk on page 3-34.

Q Virtual Mailbox

Virtual mailbox is part of Job Storage, which stores print jobs on

the hard disk without printing. It enables you to retrieve jobs later

from the operator panel, the Print Disk Manager utility (in the CD-

ROM), or the barcode reader.

Each mailbox may be used by an individual who desires to share

the printer in this mode. By default, each mailbox is numbered

from ‘Tray 001,’ ‘Tray 002,’ ... etc. To ‘post’ a job in one of these

mailboxes, you assign a numbered or named mailbox on the

printer driver when printing.

To retrieve the stored job for printing, see Retrieving Jobs from

Virtual Mailbox (VMB) on page 3-15.

The virtual mailbox can be used in PCL 6 emulation only.

Using Quick Copy

This mode enables you to print the requested number of copies

of a job, simultaneously storing the job on the hard disk. When

additional copies are required, you can reprint the required

number of copies from the printer operator panel. To print a job

as a quick copy job, see Printer Driver Guide.

The default number of print jobs that can be stored on the hard

disk is 32. This value can be increased to up to 50 from the e-MPS

Configuration menu. For details, see Changing e-MPS Configu-

ration on page 3-16. When the number of jobs reaches the limit,

the oldest job will be overwritten by the new one.

When the printer is turned off, all stored jobs will be deleted.

Q Printing Additional Copies using Quick Copy

To print additional copies of a job stored in the printer:

Press the MENU key.

Press the 3 or 4 key repeatedly until e-MPS > ap-

pears.

Press the 2 key.

Press the 3 or 4 key repeatedly until >Quick Copy

appears followed by the user name (Harold, in this

example). The user name is assigned at printing using

the printer driver.

Press the ENTER key. A blinking question mark (?) ap-

pears before the user name.

Press the 3 or 4 key to display the desired user name,

Arlen, in this example.

Press the ENTER key. The job name entered in the

printer driver (Report, in this example) appear with a

blinking question mark (?) before the letters.

Press the 3 or 4 key to scroll to the desired job title.

Press the ENTER key. The number of copies to be print-

ed can be set. To increase the copy count, press the 3

key; to decrease the copy count, press the 4 key.

Press the

ENTER

key to finalize the copy count. The

printer prints the specified number of copies for the job.

Q Deleting a Quick Copy Job

All quick copy jobs are automatically deleted when the printer is

turned off. If you desire to explicitly delete a stored quick copy

job, proceed as follows:

Follow steps 1 through 8 in the above section to dis-

play the title of the job to be deleted.

When the title of the job to be deleted is displayed, e.g.

Report, below, press the ENTER key. The cursor below

the copy count starts to blink.

NOTE

e-MPS >

>Quick Copy

Harold

>Quick Copy

?Harold

>Quick Copy

?Arlen

>Arlen

?Report

>Report

Copies 001

>Report

Copies 001

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS9500DN Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info