Bedienungsanleitung Kyocera FS9500DN (Seite 29 von 143) (Englisch)

20433

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

Chapter 3 Using the Operator Panel

3-13

Press the 4 key repeatedly until Delete appears be-

low the title.

Press the ENTER key. The stored quick copy job is de-

leted.

Using Proof-and-Hold

When you print multiple copies, this mode first prints one copy

so that you can proof it before continuing to print the remaining

copies. Since you can proof the printouts before printing the re-

maining copies, wastage of paper can be reduced.

The printer prints one copy and, at the same time, saves the print

job on the hard disk. You can also change the number of copies

when resuming printing from the operator panel.

When the printer is turned off, all stored jobs will be deleted.

Q Printing Remaining Copies of a Proof and Hold Job

Printing a Proof-and-Hold job on the operator panel is similar to

printing a quick copy job. To print remaining copies of a job held

in the printer:

Press the MENU key.

Press the 3 or 4 key repeatedly until e-MPS > ap-

pears.

Press the 2 key.

Press the 3 or 4 key repeatedly until >Quick Copy

appears followed by the user name (Harold, in this

example). The user name is assigned at printing using

the printer driver.

Press the ENTER key. A blinking question mark (?) ap-

pears before the user name.

Press the 3 or 4 key to display the desired user name,

Arlen, in this example.

Press the

ENTER

key. The job name entered in the

printer driver (Report, in this example) appears with a

blinking question mark (?) before the letters.

Press the 3 or 4 key to scroll to the desired job title.

Press the ENTER key. The number of copies to be

printed can be set. To increase the copy count, press

the 3 key; to decrease the copy count, press the 4

key.

Press the ENTER key to finalize the copy count. The

printer prints the specified number of copies for the job.

Printing a Private Job

In private printing, you can specify that a job is not printed until

you release the job from the operator panel. At sending the job

from the application software, you can specify a 4-digit access

code in the printer driver. The job is released for printing by en-

tering the access code on the operator panel. Thus, this function

ensures confidentiality of the print job.

When the printer is turned off, all the print jobs will be deleted.

Q Releasing a Private Job

Press the

key.

Press the 3 or 4 key repeatedly until e-MPS > ap-

pears.

Press the 2 key.

Press the 3 or 4 key repeatedly until >Private/

Stored appears. The name entered in the printer driver

(Harold, in this example) also appears.

Press the ENTER key. A blinking question mark (?) ap-

pears before the user name.

>Report

Delete _

e-MPS >

>Quick Copy

Harold

>Quick Copy

?Harold

>Quick Copy

?Arlen

>Arlen

?Report

>Report

Copies 001

e-MPS >

>Private/Stored

Harold

>Private/Stored

?Harold

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS9500DN Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info