20
MONTH SETTING
1. The month digits on LCD2 will start flashing (Default setting 1). Set the desired month by
use of the + key.
2. Press and release the SET key to move to the mode “Date Setting”.
DAY SETTING
1. The digits for the day will start flashing on LCD2 (Default setting 1). Set the desired day by
use of the + key.
Note: The data can only be set in conjunction with the selected month. For example, it is
not possible to set the data 30 if the months of February is selected.
2. Press and release the SET key to enter the “Weekday Setting”.
WEEKDAY SETTING
1. The weekday symbols will be displayed on LCD2 in the pre-set language and flashing. Set
the desired weekday by use of the + key.
2. Press and release the SET key to enter the mode “12/24 Hours Time Display Setting”.
12/24 HOURS TIME DISPLAY SETTING
1. The “12h” or “24h” will start flashing in LCD1 (Default setting 24h). Select the desired
time display mode by use of the + key.
2. Press and release the SET key to enter the “ºC/ºF Temperature Setting”.
°C OR °F TEMPERATURE SETTING
1. The characters “°C” or “°F” will start flashing on LCD1 (Default setting °C). B y use of the
+ key select “°C” for temperature display in degrees Celsius or “°F” for degrees
Fahrenheit.
2. Press and release the SET key to exit the setting mode and switch back to the normal
display mode.
EXIT THE MANUAL SETTING MODES
• To return to the normal display mode from anywhere in manual setting mode simply press
the SNZ key anytime.
• If no keys are pressed for about 15 seconds in setting mode, the Moonphase wall clock will
automatically switch back to normal display mode.
ALARM SETTING
To enter into the alarm setting mode:
