Bedienungsanleitung Lexmark Pro715 (Seite 47 von 55) (Englisch)

612374

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

3 If the prefix is not correct, enter the correct prefix, and then press .

Cannot receive faxes

If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:

AKE

SURE

THAT

YOU

HAVE

CONFIGURED

THE

CORRECT

SETTINGS

FOR

YOUR

SETUP

The fax settings depend on whether the printer is connected to its own fax line or shares the line with

other devices.

If the printer is sharing the telephone line with an answering machine, then make sure that the following

are set:

• Auto Answer is On.

• The printer picks up on a greater number of rings than the answering machine.

• The printer picks up on the correct distinctive ring (if you subscribe to a distinctive ring service).

If the printer is sharing the telephone line with a telephone subscribed to voice mail, then make sure

that the following are set:

• Auto Answer is Off (if you have only one number on the telephone line).

• The printer picks up on the correct distinctive ring (if you subscribe to a distinctive ring service).

AKE

SURE

THAT

THE

PRINTER

CONNECTED

ANALOG

PORT

The printer is an analog device. If you are using a PBX system, then make sure that the printer is

connected to an analog port on the PBX. You may need a digital line converter that converts digital

signals into analog signals.

AKE

SURE

THAT

THE

PRINTER

MEMORY

NOT

FULL

The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out

of ink or runs out of paper while receiving the fax, then the printer saves the fax so you can print it

later. However, if the printer memory is full, then the printer may not be able to receive more incoming

faxes. An error message appears on the display when the printer memory is full. Resolve the error to

free up space in the printer memory.

AKE

SURE

THAT

ORWARDING

DISABLED

1 From the printer control panel, navigate to:

> Setup > > Fax Setup > > Ringing and Answering > > Fax Forward >

2 Press the arrow buttons to scroll to Off, and then press .

NCREASE

THE

RINGER

VOLUME

If you set the printer to receive faxes manually (Auto Answer Off), then increase the ringer volume.

AKE

SURE

THAT

YOU

HAVE

THE

CORRECT

MANUAL

ANSWER

CODE

If you set the printer to receive faxes manually (Auto Answer Off), then you need to press the correct

code when a fax comes in so that the printer can receive it.

1 From the printer control panel, navigate to:

> Setup > > Fax Setup > > Ringing and Answering > > Manual Pickup Code >

2 Copy the manual answer code that appears on the display.

Note: To increase the security, you can change your manual pickup code to a number that only you

know. You can enter up to 7 characters for your code. The valid characters are the digits 0–9 and the

characters # and *.

Cannot run the fax software

The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the

fax settings in the fax software.

AKE

SURE

FAX

DRIVER

INSTALLED

The fax option is available for use only with the PostScript driver or the Universal Fax Driver. For

information on installing these drivers, see the Software and Documentation CD.

AKE

SURE

THE

PRINTER

CONNECTED

TELEPHONE

LINE

You need to connect the printer to your telephone line (through a standard wall jack, a DSL filter, a

VoIP adapter, or a cable modem) before you can open the fax software and configure the fax settings.

Wireless network troubleshooting

If you are having trouble setting up your printer on a network, print a network setup page, and then see

the User's Guide available on the installation software CD.

Also, make sure to check the network indicator lights to verify the connection status of the printer. For

more information on the location of the network indicator lights, see“Using the printer control panel” on

page 13.

Wireless troubleshooting checklist

Before beginning to troubleshoot the wireless printer, verify the following:

• The printer, the computer, and the access point (wireless router) are all plugged in and turned on.

• The wireless network is working properly.

Try accessing other computers on your wireless network.

If your network has Internet access, then try connecting to the Internet over a wireless connection.

• Your SSID is correct.

Troubleshooting 47

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark Pro715 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark Pro715

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info