Bedienungsanleitung Line 6 POD HD500X (Seite 8 von 18) (Englisch)

693636

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

15. Pedal 2 - Connect a standard expression pedal, such as the Line 6

EX-1, and you'll be able to assign it to control the Volume, Wah or

eectsparameterfunctions.

16. Guitar In - Plug your guitar cable in here. If you are using high gain or

active pickups you may want to set the Guitar In switch on the top of

your POD HD500X to PAD. There's really no rule, use what sounds

best.

17. CD/MP3 Input - ConnectaCDplayer,MP3player,drummachine

or other device here, and you’ll hear it through the PHONES,

UNBALANCED OUTPUT and BALANCED OUTPUT. Use your

device’s output control to adjust the volume relative to your guitar

tone. Start with the volume on your device at its lowest setting and

bring it up to the volume you desire.

18. Unbalanced Output - connect1/4"cablesheretosendyoursound

toaguitaramplier,recorder,mixerorPAsystem.Setthe1/4" OUT

switch on top of your POD HD500X to AMP when sending to a guitar

amp or LINE for devices with -10dBV inputs typical of mixers and

recorders.

19. Balanced Output - connect balanced XLR cables here for an ideal

connection to digital recorders or as direct sends to the house mixer

orPAwhenplayinglive.Ifyouareexperiencinghumsandbuzzes,

set the XLR switch on top of your POD HD500X to LIFT to eliminate

ground loops between your equipment.

20. Phones - Plug headphones in here. The volume is set by the

MASTER VOLUME knob. Always use safe listening practices,

starting with a low level and turning up from there if you need more

volume.

21. Aux In -Thismono,unbalanced1/4"inputcanbeusedforasecond

guitar or just about any other instrument. Visit the SYSTEM & I/O

edit pages for AUX IN routing options.

22. Mic Input - plug in your microphone here and use the MIC LEVEL

control to get a nice, healthy level. Visit the SYSTEM & I/O edit

pages for routing options.

23. EectsLoop-provides a stereo (when using a TRS cable) FX SEND

and a stereo FX RETURN. Set the FX LOOP LEVEL switch to LINE

to operate at higher peak-to-peak voltage, making it optimal for

line level devices. The loop can also be used with stomp boxes by

setting the FX LOOP LEVEL switch to STOMP.

24. Variax Digital Interface - this input provides power and a direct

digital audio connection between a Line 6 Variax guitar or bass and

the POD HD500X. Visit the SYSTEM & I/O edit pages to assign

signal routing options.

When you are ready to connect a Variax, use only Line 6 supplied

Variax-compatible cables – not standard Ethernet or other cables –

to avoid damage to the jack.

You can learn more about the Variax family of guitars, each one

giving you the sound of an entire guitar collection in one instrument,

at www.line6.com.

25. S/PDIF - Thisjacksendsout24-bitdigitalversionsoftheDirectOut

signals. The SYSTEM & I/O edit pages lets you choose the sample

rate and adjust level.

26. MIDI - ConnectPODHD500XtoyourMIDIequipmenttosendand

receiveProgramChangeMessagesforselectingpresets. 

19 23

21 22

2418 25

26 27 28 29

Rear Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 POD HD500X Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 POD HD500X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info