Bedienungsanleitung Line 6 POD HD500X (Seite 9 von 18) (Englisch)

693636

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

POD HD500X MIDI OUTconnectstoanotherdevice'sMIDIIN;its

MIDI INgoestoanotherdevice'sMIDIOUT.

27. USB - The USB jack lets you connect directly to a USB equipped

computer for direct recording and to take advantage of many

computer-powered features including free, downloadable editor/

librarian software, POD HD500X Edit. Read the Advanced Guide

available online to learn more.

28. L6 LINK – is a powerful, proprietary connection developed by Line

6 to enable easy, reliable, one-cable connectivity between various

Line6products.InthecaseoftheDT50Seriesguitarampliersand

POD HD (300/400/500/500X) series multi-eects processors, this

connection allows both products to sync and communicate uniquely

witheachother.L6LINKpassesbothaudioandcontroldataina

single cable, and the resulting operation allows users to plug a single

cable from their POD HD family processor into a DT50 series amp

andreceivemanyincrediblebenets:

• No additional cables are required to connect a POD HD

(300/400/500/500X)toaDT50seriesguitaramplier.

• ChangingTonesettings(forexample)oneitherthePODHDor

DT50 immediately updates your tone.

• Edit a preseton a PODHD by simplyturning knobs on the

DT50 as one would any other guitar amp, then save it on the

POD HD to perfectly recall every time the preset is selected.

• Thisoneiscrazycool!Callingupaparticularampmodelorpreset

onthePODHDenablestheDT50todynamicallyrecongure

itselfintheanalogrealmtooptimizeitscomponentstomatch

thesourceamplier.ChangeyourpresetonaPODHD,andthe

DT50 will immediately align itself in the analog realm to such

things as the appropriate Class A or A/B operation, Biasing

method,Feedbacktopology,Triode/Pentodeoperationofthe

power tubes and more!

• Automaticsensingallowslinkedmultiple(daisychained)amps

to operate in a variety of ways, depending on which POD HD is

connected.

At minimum, all POD HDs support stereo operation with linked

DT50s, and POD HD500X supports up to four uniquely linked

ampswithcongurationslikewet/drymodeeasilyavailable.

29. Power - Connect your Line 6 Power Supply here to power the unit.

Unplugtoturnito.Wrapyourpowersupplycablearoundthe“T”

shaped cable tree once or twice to prevent an accidental disconnect.

Editing Your Tone - The Basics

Amp Blocks

A single Amp Block can be placed in the “Pre” or “Post” signal ow

positions...

...or,twoAmpscanbeusedifpositionedwithinthePathsA&B.Youcan

remove Amp Block B from the signal path in any dual Amp Block preset

by selecting Amp Block A and moving it to a pre or post position using

the MOVE button.

TheAmpBlockshave3availablestates:On,O(bypassed)orDisabled

(sometimesreferredtoasa“Null”statefortheBlock).

ON DISABLEDOFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 POD HD500X Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 POD HD500X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info