Bedienungsanleitung Line 6 POD HD500X (Seite 11 von 18) (Englisch)

693636

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Knob 4 - Sets the Multi-Function knobs to alter the settings on this page

for Amp A or Amp B.

NOTE:WhenscrollingthroughtheAmpModels,you’llseethatwe’ve

also included a complete set of “Preamp” versions of each Amp as well.

You can choose one of these to obtain the tone of just the preamp stage

of the amp. This can be very useful if you want to run your POD HD500X

outputinto anexternal amplier. Deep editingparameters arenot ap-

plicabletothePreampModels.

FX Blocks

For each Preset there are always a total of 8 FX Blocks, each capable

ofloadinganyFXModelsortheFXLoop.WhenintheSignalFlowView

screen, select any FX Block and you’ll see options at the bottom of the

screen,adjustableusingtheMulti-FunctionKnobs1-4.FromtheSignal

Flow View with an FX Block selected Knob 1 - Select from among the

FX Model categories - Dynamics, Distortion, Modulation, Filter, Pitch,

EQ,Delay,Reverb,Vol/Pan,Wah,FXLoop,ornone.Knob 2 - Choose

thedesiredModelfromtheModelTypelist.Knob 3 - Choose from up

to 5 adjustable parameters for the selected FX Model. Alternatively,

double-press the ENTERbuttontodisplaytheEditModescreen,where

allparametersaresimultaneouslyviewablefortheselectedFXModel.

Knob 4 - Adjusts the value for the currently selected parameter.

EachFXBlockalsooersthefollowingfeatures:On/O: Toggle the FX

Block“On” or “O” by pressingthe ENTER button once. Your signal

willstillowthroughtheeect,butwillnotbeprocessedbyit.Move FX

Position: To move any FX Block, start within the Signal Flow View and

select the FX Block to be moved. Press the MOVE button and you’ll see

the selected FX Block appear “raised” to indicate it is now moveable.

Use the 4 Way Nav Pad to move the FX Block to the desired position.

Oncethe FXBlock isin thedesiredPosition, presstheMOVE button

again to drop it into place.

FX Loop

You can select to load the FX Loop in any of the 8 FX blocks. This allows

you to position the POD HD500X hardware FX Loop anywhere you like

within the current Preset’s signal path.

Just as with FX, you can access options for the FX Loop at the bottom of

theSignalFlowView,orintheEditModescreen.Youcanalsotogglethe

FXLoop“On”or“O”bypressingtheENTER button once.

Mixer Block

TheMixerispermanentlypositionedattheendoftheparallelPathsA&

B and provides individual Level and Pan controls for each Paths’ output

beforefedtothe“Post”position.WhentheMixerisselectedintheSignal

Flow View, its four parameters are available at the bottom of the screen,

accessibleusingtheMulti-functionKnobs1-4.

Knob 1 - Volume A controls the volume level of the Path A output. 0 dB

is unity gain.

Knob 2 - Volume B controls the volume level of the Path B output. 0 dB

is unity gain.

Knob 3 - Pan Aadjuststheleft/rightstereobalanceofthePathAoutput.

Knob 4 - Pan Badjuststheleft/rightstereobalanceofthePathBoutput.

Note: Changestothemixerlevelscanaectthewayanyeectsand

amp models are "driven" when placed before them in your signal chain.

For example, turning up the mixer in front of an amp model may cause

the amp's distortion characteristic to change...a testament to the authen-

tic behavior of our amp models.

Expression Pedal Assignment

PODHD500Xincludestwo PedalModes,EXP 1 and EXP 2, each of

whichcanbeassignedtoanyFXModelparameter,orevenanFXLoop

parameter. The EXP 1 and EXP 2PedalModescaneachbeassignedto

control independent FX parameters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 POD HD500X Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 POD HD500X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info