Bedienungsanleitung Line 6 POD HD500X (Seite 12 von 18) (Englisch)

693636

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

The “on-board” Pedal can switch between either the EXP 1 or EXP 2

PedalModes.Clickthe"toeswitch"totogglebetweenEXP 1 and EXP

2. When an Expression Pedal is connected to the PEDAL 2 input on the

back of POD HD500X it controls EXP 2.

Controlling Amp & FX Parameters

ConguringtheEXP 1&EXP 2 parameter assignments is done within the

Controller Assign screen. To access the Controller Assign screen, go to

the Signal Flow View and select the Amp or FX Block for which you’d like

to create an Expression Pedal assignment. Select the desired FX block,

then double-press the MOVE

button. The Controller Assign screen is

thendisplayedspecicallyfortheAmporFXModelcurrentlyloadedin

theselectedBlock.UsetheMulti-functionKnobs1-4tocongurethe

PedalassignmentsoptionsspecicallyforthisFXModel.

Knob 1 -SelectstheparameterforthecurrentModelthatyouwantto

control with an EXP.

Knob 2 - Selects the controller that you want to assign to the parameter.

Choose O to have no Pedal assignment, or choose EXP 1 or EXP 2.

Knob 3 - Sets the parameter value you’d like for the Pedal’s “heel”

position.

Knob 4 - Sets the parameter value you’d like for the Pedal’s “toe”

position.

Assigning an FX or Amp Block to a Footswitch

FS1 through FS8 footswitches, as well as the Exp Pedal’s “toe switch”

canbeconguredtotoggleanyoftheFXorAmpBlocksOn/O.From

within the Signal Flow screen, select the FX or Amp Block which you want

assigned to one of your footswitches. Then Press and hold the ENTER

button to display the Footswitch Assign screen. The Footswitch Assign

pageissimilartoyourSignalFlowview.UseMulti-functionKnob 1 to

select the footswitch to which you want this FX Block assigned. Note:

you can assign multiple FX Blocks to a single footswitch or Exp Pedal's

"toe switch". You can reference the current Preset’s FX footswitch as-

signments by pressing the VIEW button to display the Performance

View screen.

Set Lists

PODHD500Xstoresup64Presetswithin eachofits8SetLists.The

big idea here is that you can load any one of these Set Lists to then gain

access to any of its Preset locations.

From any screen, simply push the PRESETS knob to display the Set

Lists screen.

Load a Set List: Use the 4 Way Nav, or turn the PRESETS knob to

select any Set List, then press the ENTER button. This immediately

loadsthe selected Set List, making allits Presetsavailable. Note that

your previously loaded Preset is automatically closed, and the Preset of

thesameBank/ChannellocationnumberfromthenewSetListisloaded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Line 6 POD HD500X Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Line 6 POD HD500X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info