602207
32
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
3. The next screen shows all of the Wireless AP + Cable/DSL Router’s avail-
able ports. The port you will want to configure is the printer port, shown in
this screen as “SC0D8B45_P1 Shared Port”. (Your port number may be dif-
ferent.)Make sure this port is selected and click the Next button to continue.
4. At this stage, Windows 2000 will notify you that a driver has already been
installed for this printer. This is due to an idiosyncrasy in Windows 2000.
Though you have not already installed printer drivers, you will want to select
Keep Existing Driver (recommended). DO NOT choose Replace existing
driver. Click the Next button to continue.
58
When adding a printer under Windows 2000, make sure that the final window
in the Installing the PrintServer’s Drivers section does NOT have the “Run
Print Port Setup now” box checked. Selecting this box will lead to an error in
the installation process. Make sure that this box is NOT selected before con-
tinuing to this section.
1. Go to “Add Printer” by clicking the Start button, selecting Settings, and
clicking Printers.
Then, to begin the configuration process, click the Next button.
2. The next screen will ask how your printer is attached to your computer.
Since your printer is being connected to a network, rather than a single
computer, you will still want to select Local Printer. Do not select
Network Printer, even though your printer is being connected to a
Network, since it is being connected directly to the Wireless AP +
Cable/DSL Router. Nor should you select Automatically Detect and Install;
this is only done when the printer is connected to the PC. Make sure Local
Printer is selected, as in the screen below, and click the Next button to con-
tinue.
57
Etherfast
®
Wireless AP + Cable/DSL Router with PrintServerInstant Broadband
TM
Series
Adding a Printer under Windows 2000
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Linksys BEFW11P1 EtherFast Wireless AP plus Cable-DSL Router wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info