Bedienungsanleitung Linksys E2500 (Seite 41 von 80) (Englisch)

461757

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Setting Up: Advanced

Linksys E-Series

You need to take note of your new router’s settings, then apply some of those

settings to the old router so it can work as an access point.

To view your new router’s settings:

Wireless > Basic Wireless Settings

Wireless > Wireless Security

Status > Wireless Network

Setup > Basic Setup

Make sure that your new router is connected to the Internet.

In the browser-based utility, click the Wireless tab, then click the Basic

Wireless Settings page and take note of the Network Name (SSID).

Click the Wireless tab, then click the Wireless Security page and take

note of the Security Mode and the passphrase.

Click the Status tab, then click the Wireless Network page and take note

of the Channel.

Click the Setup tab, then click the Basic Setup page and take note of

the DHCP server’s IP Address range (192.168.1.100 to 192.168.1.149 by

default)

To use your old router as an access point:

With your computer connected to your old router, log into its browser-

based administration utility.

NOTE

Save your changes after finishing each step below.

Open the setup page for the local network (LAN).

In the Router IP address field, enter an unused IP address for the LAN

network of your new router.

For example, if your new router has an IP address of 192.168.1.1, you

should choose an IP address on the 192.168.1.0 network. You can choose

any address within the range of 192.168.1.2 to 192.168.1.254. You should

exclude addresses in the range that will be used by the DHCP Server of

your new router (192.168.1.100 to 192.168.1.149). A safe choice might be

192.168.1.250. Take note of this address, because this will be the address

that you will use to manage your old router in the future.

In the Subnet Mask field, enter 255.255.255.0 or, if available, select that

subnet mask from a drop-down list.

Disable the DHCP server on your old router. (Because your old router will

be operating as an access point instead of a router, you don’t want it to

distribute IP addresses. There should be only one active DHCP server on

your network, and that should be your new router.)

To reconfigure the wireless network on your old router:

Open the wireless network setup page.

Change the network name (SSID) to match the name of your new

network. Having the same network name and security settings

enables you to seamlessly roam between your new router and your

old router.

Change the security mode to match the security mode on your new

router.

Change the passphrase (sometimes called the pre-shared key) on

your old router to match the passphrase on your new router.

Change the wireless channel to a non-conflicting channel. Some

manufacturers have an “Auto” function for channel selection that

automatically selects a wireless channel that does not interfere with

other nearby wireless networks. If your old router supports an Auto

function, select that. Otherwise, you may need to manually select the

wireless operating channel on your old router. In the 2.4 GHz wireless

spectrum, there are only three non-overlapping channels: 1, 6, and

11. Pick a channel that does not overlap the operating channel of your

new router. For example, if your new router is operating on channel

11, configure your old router for either channel 1 or channel 6.

Connect an Ethernet network cable to one of the LAN/Ethernet ports on

your old router and an Ethernet port on your new router.

CAUTION

Do not connect the cable to the Internet port on your old router. If

you do, you may not be able to set up the router as an access point

on the current network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys E2500 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Linksys E2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info