757006
68
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
70 User Manual
Advanced Mode
The chartplotter can operate in two different modes: Basic Mode and Advanced Mode. In Advanced
Mode it is possible to have more available functions, for example it is possible to handle Waypoints.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" + 'ENTER' + "On" + 'ENTER'
Advanced Settings (menu)
Selects the Setup, Fix, Navigate, Track, Compass, Alarms, Simulation, Route menus and the User
Points page and User C-Cards menu.
'MENU' + "ADVANCED SETTINGS" + 'ENTER'
Alarms (menu)
Sets the desired value for the Arrival Alarm, XTE Alarm, Anchor Alarm, Depth Alarm, External
Alarm. Also you can set the preferred value for the Grounding Alarm, Grounding Alarm Range,
Grounding Alarm Report.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER'
Alter = Alternate Solution
Turns On/Off the Alternate Solution in the chain. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER' + "TD" + 'ENTER' + "Alter" + 'ENTER'
Altitude (Unit)
Sets the altitude (altitude of GPS Antenna on the medium sea level) unit among Ft = Feet, FL = Flight
Level and Mt = Meters. The default setting is Ft.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ALTITUDE" + 'ENTER'
Anchor Alarm
This function allows inserting of the limit of anchor dragging: beyond that, the alarm is activated. The
chartplotter computes the distance between the current GPS position and the GPS position saved at
the activation of the anchor alarm in the menu. If the computed distance exceeds the value set in the
menu, the chartplotter shows the alarm message and starts the acoustic alarm. The default setting is
Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "ANCHOR ALARM" +
'ENTER'
Arrival Alarm
Specifies the radius of a circle around the Waypoint of a route: when your vessel reaches this circle the
alarm sounds. You can disable (Off) the Arrival Alarm or insert value. The default setting is 1.00 Nm.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "ARRIVAL ALARM" +
'ENTER'
Arrival Time
The estimated time of day you will reach your destination, based on your current speed and track from
GPS.
Attention Areas
Enables (On) or disables (Off) the displaying of the Attention Areas (areas in which special attention by
the mariner is required, because of natural or man-made hazards, or sailing regulations and restric-
tions). Moreover a special symbol (!) is placed inside the area selecting On. This is valid also for the
categories: FISHING FACILITY, MARINE FARM/CULTURE, MILITARY PRACTICE AREA,
RESTRICTED AREA, SEAPLANE LANDING AREA. When the area is small, it is identified only
by the boundary. The default setting is Contour.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Attention Ar-
eas" + 'ENTER'
Auto Info
The type of Automatic Info is user selectable. The possible settings are: Off: disabled, no automatic info
68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorenz STARLIGHT PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info