757006
69
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
71
User Manual
shown at all; On Points: only on points. This is the default setting. On All: on all objects (points, lines
and areas).
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "AUTO INFO" + 'ENTER'
AUX IN I/O Cable Wiring
Displays the Cable Wiring page for AUX IN I/O.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +"AUX IN I/O CABLE
WIRING" + 'ENTER'
Azimuth
The angular measurement from the horizon to a satellite or another object.
Basic Mode
The chartplotter can operate in two different modes: Basic Mode and Advanced Mode. In the first
mode there is a restricted number of functions, and it is not possible to handle Waypoints, Marks,
Events and A-B-C-D function.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" + 'ENTER' + "Off" + 'ENTER'
Basic Settings (menu)
Enables or disables Advanced Functions and Depth Window; selects the Language, sets the desired
setting for Distance, Speed, Depth, Temperature and Altitude unit, Nav Aids Presentation, Course
Vector, User Points, Screen Amplifier and select the Input/Output menu and C-Voice mode.
'MENU' + "BASIC SETTINGS" + 'ENTER'
Beacon
A prominent, specially constructed object forming a conspicuous vertical mark as a fixed aid to navigation.
Bearings
Selects either degrees Mag or True. If magnetic readings are selected the variation is computed auto-
matically for every zone as soon as the chart is displayed. The default setting is Mag.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "COMPASS" + 'ENTER' + "BEARINGS" + 'ENTER'
Beeper
Turns On/Off the sound after pressing a key ("beep"). The default setting is On.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "BEEPER" + 'ENTER'
BRG = Bearing
It is the angle between the North (True or Magnetic) and a destination. It represents the direction to
follow.
Buoy
A floating object moored to the sea bottom in a particular (charted) place, as an aid to navigation.
Buoys & Beacons
Buoys and Beacons are used to indicate to mariners recommended or established routes, underwater
dangers, restrictions and regulations. They can be lighted or not and - for the color chartplotter - are
coloured according to their international code.
Buoys Name
To identify better the Buoys, the name/number of the buoys is shown next to the icon on the chart.
The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Buoys Name"
+ 'ENTER'
Calibration
The variation table is used to match magnetic value readout on the chartplotter comparable with the
value given by the compass of the boat. In other words, since the compass of the boat must be compen-
sated (due to the iron masses, ...), we use the same values given by the chartplotter. This means that, for
example, if the BRG to the next Waypoint readout in the chartplotter display is "X" Mag degree, if you
69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorenz STARLIGHT PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info