757006
70
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
72 User Manual
steer the boat reading "X" Mag degree from the compass, you are driving well toward the next Waypoint.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "COMPASS" + 'ENTER' + "CALIBRATION" +
'ENTER'
Chain
Selects the chain. The Loran chains are groups of transmitting stations that use timed radio pulse
transmissions. In each of these chains there is a master station and two or more slave or secondary
stations. Stations belonging to a same chain transmit pulses in timing groups: a different time base
identifies each chain. The time base of each chain is the Group Repetition Interval or GRI. This GRI
identifies the chain in unique mode. For example the GRI = 4990 identifies the chain of Central Pacific
zone. The default setting is 9970.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER' + "TD" + 'ENTER' + "Chain" + 'ENTER'
Change (User C-CARD)
Changes the current User C-CARD.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' + "CHANGE" +
'ENTER'
Chart Boundaries
Enables (On) or disables (Off) the displaying of the Chart Boundaries. Selecting Auto instead, if we are in
background charts only the first charts level contained in the C-CARD are displayed, if we are in a charts
level contained in the C-CARD the next four charts level are displayed. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Chart Bound-
aries" + 'ENTER'
C-Link
Selects the Master unit (Primary Station) or the Slave unit (Secundary Station):
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "C-LINK" + 'ENTER'
+ "Secundary Station/Primary Station" + 'ENTER'
Clear (Track)
To clear the stored track.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "CLEAR" + 'ENTER' +
"YES" + 'ENTER'
COG = Course Over Ground
Direction of the path over ground actually followed by a vessel.
Color (Track)
Selects the desired color for the track.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "COLOR" + 'ENTER'
Compass (menu)
Sets the desired value for Bearing and Magnetic Variation, and selects the Calibration page.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "COMPASS + 'ENTER'
Compute Correction
Corrects fixes from the positioning instrument. By placing the cursor on the ship's real position and
selecting this option, the error is calculated and internally memorized for appropriate correction, but
not applied.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX " + 'ENTER' + "COMPUTE CORRECTION" + 'ENTER'
Coordinate System
Sets your preferred Coordinate System among ddd mm ss, ddd mm.mm, ddd mm.mmm, UTM, OSGB,
TD. The default setting is ddd mm.mmm.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER'
70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorenz STARLIGHT PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info