Bedienungsanleitung Lynx ONE (Seite 15 von 36) (Englisch)

586987

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Page 15

Digital Input Status – Just below the Volume Faders on the Digital In panel are two

status indicators. The top indicator delineates professional or consumer channel

status with PRO or CON labels. Professional status is generally associated with

an AES/EBU signal, and consumer status is generally associated with an S/P DIF

signal. The bottom indicator shows Lock/Unlock status or an error code for the

digital input:

Code Color DIGITAL IN Status/Error

Lock Green Locked and receiving audio data flagged as valid.

Lock Yellow Locked and receiving audio data flagged as invalid.

Unlock Red Not locked – caused by an unstable signal or loss of connection.

Conf Red Indicates a degraded signal typically caused by long or lossy

cables.

Biphase Red Indicates a signal that violates the biphase encoding rules.

Parity Red Indicates a signal that does not have even parity.

CRC Red Indicates a signal whose CRC channel status does not match the

calculated CRC.

These indicators are updated four times per second.

Monitor – Enables or disables input monitoring for each output device. The Monitor

Source control selects which input is monitored. The monitor circuitry on the

LynxONE digitally mixes the selected monitor source with the output signal with

a one sample period delay. Because of this extremely low delay, the use of the

LynxONE’s monitor function is recommended instead of the monitoring features

of third party applications when performing overdubs.

Mute – Provides a mute function for each associated input or output.

Input / Output Activity Indicators – The names at the bottom of the analog and

digital I/O panels reflect the name of its associated wave device. When a device is

inactive its name is shown as blue text. When a device is active (currently open

for play or record) its name appears in black with a green background.

Sample Clock – This section of the LynxONE mixer provides control of the sample

clock source and reference. Since the sample clock is the master timing source, all

LynxONE audio devices on a single card must have identical sample rates. Sample

clock settings cannot be changed if any LynxONE audio device is playing or

recording.

Source – Allows selection of the sample clock source from one of the following:

Internal – Clock derived from the on-board crystal oscillator.

External – Clock signal from the CLOCK IN connector on the MIDI/Clock

cable.

Header – Clock signal from the board-mounted CLOCK IN header.

Digital – Clock signal from the DIGITAL IN connector on the Audio cable.

The Digital Format control must be correctly selected when selecting

this clock source.

Reference – Provides selection of the clock source reference type from one of the

following:

Mixer Reference

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lynx ONE Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info