Bedienungsanleitung Makita DSL800ZU (Seite 13 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

711195

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

13 ENGLISH

NOTE: Depending on the conditions of use and the

ambienttemperature,theindicationmaydifferslightly

fromtheactualcapacity.

Tool / battery protection system

Thetoolisequippedwithatool/batteryprotectionsys-

tem.Thissystemautomaticallycutsoffpowertothe

motortoextendtoolandbatterylife.Thetoolwillauto-

maticallystopduringoperationifthetoolorbatteryis

placedunderoneofthefollowingconditions:

Overload protection

Whenthetoolorbatteryisoperatedinamannerthat

causesittodrawanabnormallyhighcurrent,thetool

automaticallystopsandthelampblinks.Inthissit-

uation, turn the tool off and stop the application that

causedthetooltobecomeoverloaded.Thenturnthe

tool on to restart.

Overheat protection

Whenthetoolorbatteryisoverheated,thetoolstops

automaticallyandthelamplightsup.Inthiscase,letthe

toolandbatterycoolbeforeturningthetoolonagain.

Overdischarge protection

Whenthebatterycapacityisnotenough,thetoolstops

automatically.Inthiscase,removethebatteryfromthe

toolandchargethebattery.

Switch action

CAUTION: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released.

CAUTION: Switch can be locked in "ON" posi-

tion for ease of operator comfort during extended

use. Apply caution when locking tool in "ON"

position and maintain rm grasp on tool.

CAUTION: Do not install the battery cartridge

with the lock button engaged.

CAUTION: When not operating the tool,

depress the trigger-lock button from side to

lock the switch trigger in the OFF position.

►Fig.3: 1.Trigger-lockbutton

►Fig.4: 1. Switch trigger 2.Lockbutton3. Trigger-

lockbutton

Topreventtheswitchtriggerfromaccidentallypulled,

thetrigger-lockbuttonisprovided.Tostartthetool,

depressthetrigger-lockbuttonfromA(

) side and pull

the switch trigger. Release the switch trigger to stop.

Afteruse,depressthetrigger-lockbuttonfromB( )

side.

Forcontinuousoperation,depressthelockbuttonwhile

pulling the switch trigger, and then release the switch

trigger.Tostopthetool,pulltheswitchtriggerfully,then

release it.

Speed adjusting dial

►Fig.5: 1.Speedadjustingdial

Therotationspeedofthetoolcanbechangedbyturn-

ingthespeedadjustingdial.Thetablebelowshows

thenumberonthedialandthecorrespondingrotation

speed.

Number Speed

1 1,000 min

-1

2 1,200 min

-1

3 1,400 min

-1

4 1,600min

-1

5 1,800 min

-1

NOTICE: When changing the speed dial from "5"

to "1", turn the dial counterclockwise. Do not turn

the dial clockwise forcibly.

Overload and overheat indicator

lamp

►Fig.6: 1. Indicator lamp

If the tool is operated with excessive load, the tool stops

automaticallyandtheindicatorlampblinksinred.Inthis

case, reduce the load on the tool.

Ifthetoolisoverheated,thetoolstopsautomatically

and the indicator lamp lights up in red. In this case, let

thetoolcooldownbeforeturningthetoolonagain.

Electronic function

Thetoolsequippedwithelectronicfunctionareeasyto

operatebecauseofthefollowingfeatures.

Constant speed control

Possibletogetnenish,becausetherotatingspeedis

kept constant even under the loaded condition.

Soft start feature

Softstartbecauseofsuppressedstartingshock.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Assembling the tool bag

1. Takeoutthetoolandthetoolbagfromthebox.

►Fig.7

2. Unfoldthetoolbag.

►Fig.8: 1.Toolbag

3. Inserttheinnertrayintothetoolbag,andthenx

theinnertraywithhookandloopfastenerasshownin

thegure.

►Fig.9: 1. Hook and loop fastener 2.Innertray

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DSL800ZU Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info