Bedienungsanleitung Makita DSL800ZU (Seite 15 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

711195

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

15 ENGLISH

WIRELESS ACTIVATION

FUNCTION

Optional accessory

What you can do with the wireless

activation function

Thewirelessactivationfunctionenablescleanandcom-

fortableoperation.Byconnectingasupportedvacuum

cleanertothetool,youcanrunthevacuumcleaner

automaticallyalongwiththeswitchoperationofthetool.

►Fig.24

To use the wireless activation function, prepare follow-

ingitems:

• Awirelessunit(optionalaccessory)

• Avacuumcleanerwhichsupportsthewireless

activation function

The overview of the wireless activation function

setting is as follows. Refer to each section for detail

procedures.

1. Installing the wireless unit

2. Tool registration for the vacuum cleaner

3. Starting the wireless activation function

Installing the wireless unit

Optional accessory

CAUTION: Place the tool on a at and stable

surface when installing the wireless unit.

NOTICE:

Clean the dust and dirt on the tool before

installing the wireless unit.Dustordirtmaycause

malfunction if it comes into the slot of the wireless unit.

NOTICE:

To prevent the malfunction caused by static,

touch a static discharging material, such as a metal part

of the tool, before picking up the wireless unit.

NOTICE:

When installing the wireless unit, always

be sure that the wireless unit is inserted in the cor-

rect direction and the lid is completely closed.

1. Openthelidonthetoolasshowninthegure.

►Fig.25: 1. Lid

Insert the wireless unit to the slot and then close the lid.

Wheninsertingthewirelessunit,aligntheprojections

with the recessed portions on the slot.

►Fig.26: 1. Wireless unit 2.Projection3. Lid

4. Recessed portion

Whenremovingthewirelessunit,openthelidslowly.

Thehooksonthebackofthelidwillliftthewirelessunit

asyoupullupthelid.

►Fig.27: 1. Wireless unit 2. Hook 3. Lid

Afterremovingthewirelessunit,keepitinthesupplied

case or a static-free container.

NOTICE: Always use the hooks on the back of

the lid when removing the wireless unit. If the

hooks do not catch the wireless unit, close the lid

completelyandopenitslowlyagain.

Tool registration for the vacuum

cleaner

NOTE:AMakitavacuumcleanersupportingthe

wirelessactivationfunctionisrequiredforthetool

registration.

NOTE:Finishinstallingthewirelessunittothetool

beforestartingthetoolregistration.

NOTE: During the tool registration, do not pull the

switch trigger or turn on the power switch on the

vacuum cleaner.

NOTE: Refer to the instruction manual of the vacuum

cleaner, too.

Ifyouwishtoactivatethevacuumcleaneralongwith

theswitchoperationofthetool,nishthetoolregistra-

tionbeforehand.

1. Installthebatteriestothevacuumcleanerandthe

tool.

2. Setthestand-byswitchonthevacuumcleanerto

"AUTO".

►Fig.28: 1.Stand-byswitch

3. Pressthewirelessactivationbuttononthevac-

uum cleaner for 3 seconds until the wireless activation

lampblinksingreen.Andthenpressthewirelessacti-

vationbuttononthetoolinthesameway.

►Fig.29: 1.Wirelessactivationbutton2. Wireless

activation lamp

If the vacuum cleaner and the tool are linked success-

fully,thewirelessactivationlampswilllightupingreen

for2secondsandstartblinkinginblue.

NOTE:Thewirelessactivationlampsnishblinking

in green after 20 seconds elapsed. Press the wireless

activationbuttononthetoolwhilethewirelessacti-

vationlamponthecleanerisblinking.Ifthewireless

activationlampdoesnotblinkingreen,pushthewire-

lessactivationbuttonbrieyandholditdownagain.

NOTE: When performing two or more tool registra-

tionsforonevacuumcleaner,nishthetoolregistra-

tiononebyone.

Starting the wireless activation

function

NOTE:Finishthetoolregistrationforthevacuum

cleaner prior to the wireless activation.

NOTE: Refer to the instruction manual of the vacuum

cleaner, too.

Afterregisteringatooltothevacuumcleaner,the

vacuumcleanerwillautomaticallyrunsalongwiththe

switch operation of the tool.

1. Install the wireless unit to the tool.

2. Connect the hose of the vacuum cleaner with the

tool.

►Fig.30

3. Setthestand-byswitchonthevacuumcleanerto

"AUTO".

►Fig.31: 1.Stand-byswitch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DSL800ZU Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info