Bedienungsanleitung Makita DUR368A (Seite 21 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690568

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

21 ENGLISH

Automatic Torque Drive Technology

WhenyouturnontheAutomaticTorqueDrive

Technology(ADT),thetoolrunsatoptimumrotation

speedandtorquefortheconditionofgrassbeingcut.

TostartADT,pressandholdthereversebuttonuntilthe

ADTindicatorturnson.Afterthat,tapthemainpower

button to select the cutting tool attached to the tool. Light

the lamp beside marking to select cutter blade and

plastic blade, marking to select nylon cutting head.

TostopADT,pressandholdthereversebuttonuntilthe

ADTindicatorturnsoff.

►Fig.11: 1. marking 2. marking 3.ADT

indicator 4.Mainpowerbutton5. Reverse

button

Indicator Mode Cutting tool Rotation

speed

ADT

(Cutter blade)

Cutter blade

Plastic blade

3,500 - 6,500

min

-1

ADT

(Nylon cutting

head)

Nylon cutting

head

3,500 - 6,500

min

-1

Reverse button for debris removal

WARNING: Switch off the tool and remove

the battery cartridge before you remove entan-

gled weeds or debris which the reverse rotation

function can not remove.Failuretoswitchoffand

remove the battery cartridge may result in serious

personalinjuryfromaccidentalstart-up.

Thistoolhasareversebuttontochangethedirectionofrotation.

Itisonlyforremovingweedsanddebrisentangledinthetool.

Toreversetherotation,tapthereversebuttonandpull

thetriggerwhenthecuttingtoolisstopped.Thepower

lamp starts blinking, and the cutting tool rotates in

reverse direction when you pull the switch trigger.

Toreturntoregularrotation,releasethetriggerandwait

until the cutting tool stops.

►Fig.12: 1. Reverse button 2. Power lamp

NOTE: During the reverse rotation, the tool operates

onlyforashortperiodoftimeandthenautomatically

stops.

NOTE: Once the tool is stopped, the rotation returns

to regular direction when you start the tool again.

NOTE:Ifyoutapthereversebuttonwhilethecutting

tool is still rotating, the tool comes to stop and to be

readyforreverserotation.

Electric brake

Thistoolisequippedwithanelectricbrakeforthecut-

tingtool.Ifthetoolconsistentlyfailstoquicklystopthe

cuttingtoolaftertheswitchtriggerisreleased,havethe

tool serviced at our service center.

CAUTION: This brake system is not a substi-

tute for the protector. Never use the tool without

the protector. An unguarded cutting tool may result

inseriouspersonalinjury.

Electronic function

Constant speed control

Thespeedcontrolfunctionprovidestheconstantrota-

tionspeedregardlessofloadconditions.

Soft start feature

Softstartbecauseofsuppressedstartingshock.

ASSEMBLY

WARNING: Always be sure that the tool is

switched off and battery cartridge is removed

before carrying out any work on the tool.Failureto

switchoffandremovethebatterycartridgemayresult

inseriouspersonalinjuryfromaccidentalstart-up.

WARNING: Never start the tool unless it is

completely assembled.Operationofthetoolina

partially assembled state may result in serious per-

sonalinjuryfromaccidentalstart-up.

Installing the handle

For DUR368A

1. Inserttheshaftofthehandleintothegrip.Align

thescrewholeinthegripwiththeoneintheshaft.

Tightenthescrewsecurely.

►Fig.13: 1. Grip 2.Screw3.Shaft

NOTICE: Note the direction of the grip. The

screw holes will not be aligned if the grip is not

inserted in the correct direction.

Place handle between handle clamp and handle holder.

Adjustthehandletoananglethatprovidesacomfortable

workingpositionandthensecurewithhexsocketheadbolts.

►Fig.14: 1.Hexsocketheadbolt2. Handle clamp

3. Handle holder

For DUR368L

1. Attach the upper and lower clamps on the damper.

2. Putthehandleontheupperclampandxitwith

hexsocketheadboltsasillustrated.

►Fig.15: 1.Hexsocketheadbolt2. Handle 3. Upper

clamp 4. Damper 5. Lower clamp 6.Spacer

CAUTION:

Do not remove or shrink the spacer. Doing

solosethebalanceofthetoolandmaycausepersonalinjury.

Attaching the barrier

Country specic

Ifthebarrierisincludedinyourmodel,attachittothe

handle using the screw on the barrier.

►Fig.16: 1. Barrier 2.Screw

CAUTION:

After assembling the barrier, do not

remove it.Thebarrierworksasasafetyparttoprevent

youfromcontactingthecuttingbladeaccidentally.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DUR368A Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info