Bedienungsanleitung Makita DUR368A (Seite 22 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690568

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

22 ENGLISH

Hex wrench storage

CAUTION: Be careful not to leave the hex

wrench inserted in the tool head. It may cause

injuryand/ordamagetothetool.

Whennotinuse,storethehexwrenchasillustratedto

keepitfrombeinglost.

►Fig.17: 1.Hexwrench

Fortheloophandlemodel,thehexwrenchcanalsobe

stored on the handle as illustrated.

►Fig.18: 1.Hexwrench

Correct combination of the cutting

tool and the protector

CAUTION: Always use the correct combi-

nation of cutting tool and the protector. A wrong

combinationmaynotprotectyoufromthecuttingtool,

yingdebris,andstones.Itcanalsoaffectthebal-

anceofthetoolandresultinaninjury.

Cutting tool Protector

Cutter blade

(3-tooth, 4-tooth, and 8-tooth

blades)

Nylon cutting head

Plastic blade

Installing the protector

WARNING: Never use the tool without the

guard illustrated in place.Failuretodosocan

causeseriouspersonalinjury.

NOTE:Thetypeoftheprotectorsuppliedasthestan-

dard accessory varies depending on the countries.

For cutter blade

Attach the protector to the clamp using bolts.

►Fig.19: 1. Clamp 2. Protector

For nylon cutting head / plastic blade

CAUTION: Take care not to injure yourself on

the cutter for cutting the nylon cord.

Attach the protector to the clamp using bolts.

►Fig.20: 1. Clamp 2. Protector 3. Cutter

Installing the cutting tool

CAUTION: Always use the supplied

wrench(es) to remove or to install the cutting tool.

CAUTION: Be sure to remove the hex wrench

inserted into the tool head after installing the

cutting tool.

NOTE:Thetypeofthecuttingtool(s)suppliedasthe

standard accessory varies depending on the coun-

tires.Thecuttingtoolisnotincludedinsomespeci-

cationsofthemodel.

NOTE:Turnthetoolupsidedownsothatyoucan

replace the cutting tool easily.

Cutter blade

CAUTION: When handling the cutter blade,

always wear gloves and put the blade cover on

the blade.

CAUTION: The cutter blade must be well pol-

ished, and free of cracks or breakage.Ifthecutter

blade hits a stone during operation, stop the tool and

check the blade immediately.

CAUTION: The cutter blade-fastening nut

(with spring washer) wears out in course of time.

If there appears any wear or deformation on the

spring washer, replace the nut. Ask your local

authorized service center to order it.

CAUTION: The outside diameter of the cutter

blade must be as follows. Never use any cutter

blade with larger outside diameter.

— 3-tooth blade : 230 mm

— 4-tooth blade : 230 mm

— 8-tooth blade : 230 mm

►Fig.21: 1. Nut 2. Clamp washer 3. Cutter blade

4. Receive washer 5.Spindle6.Hexwrench

1. Insertthehexwrenchthroughtheholeinthetool

headtolocktheshaft.Rotatetheshaftuntilthehex

wrenchisfullyinserted.

Mountthecutterbladeontothereceivewashersothatthe

arrows on the blade and protector are pointing in the same direction.

►Fig.22: 1. Arrow

3. Put the clamp washer onto the cutter blade and

thentightenthenutsecurelybytheboxwrench.

►Fig.23: 1.Hexwrench2.Boxwrench3.Tighten

4. Loosen

NOTE:Tighteningtorque:16-23N•m

4. Removethehexwrenchfromthetoolhead.

Toremovethecutterblade,followtheinstallationproce-

dures in reverse.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DUR368A Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info