Bedienungsanleitung Makita DUR368A (Seite 23 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690568

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

23 ENGLISH

Nylon cutting head

NOTICE: Be sure to use genuine Makita nylon

cutting head.

►Fig.24: 1. Nylon cutting head 2. Receive washer

3.Spindle4.Hexwrench5.Tighten

6. Loosen

1. Insertthehexwrenchthroughtheholeinthetool

headtolocktheshaft.Rotatetheshaftuntilthehex

wrenchisfullyinserted.

2. Place the nylon cutting head onto the spindle and

tighten it securely by hand.

3. Removethehexwrenchfromthetoolhead.

Toremovethenyloncuttinghead,followtheinstallation

procedures in reverse.

Plastic blade

NOTICE: Be sure to use genuine Makita plastic

blade.

►Fig.25: 1. Plastic blade 2. Receive washer

3.Spindle4.Hexwrench5.Tighten

6. Loosen

1. Insertthehexwrenchthroughtheholeinthetool

headtolocktheshaft.Rotatetheshaftuntilthehex

wrenchisfullyinserted.

2. Place the plastic blade onto the spindle and

tighten it securely by hand.

3. Removethehexwrenchfromthetoolhead.

Toremovetheplasticblade,followtheinstallationpro-

cedures in reverse.

OPERATION

Attaching the shoulder harness

CAUTION: Always use the shoulder harness

attached to the tool. Before operation, adjust the

shoulder harness according to the user size to

prevent fatigue.

CAUTION: Before operation, make sure that

the shoulder harness is properly attached to the

hanger on the tool.

1. Weartheshoulderharnessonyourleftshoulder.

►Fig.26

2. Clasp the hook on the shoulder strap to tool's

hanger.

DUR368A

►Fig.27: 1. Hook 2. Hanger

DUR368L

►Fig.28: 1. Hook 2. Hanger

3. Adjusttheshoulderharnesstoacomfortable

working position.

►Fig.29

Theshoulderharnessfeaturesameansofquick

release.

Simplysqueezethesidesofthebuckletoreleasethe

toolfromtheshoulderharness.

DUR368A

►Fig.30: 1. Buckle

DUR368L

►Fig.31: 1. Buckle

Adjusting the hanger position

Formorecomfortablehandlingofthetool,youcan

change the hanger position.

Besuretoadjustthehangerpositionasshowninthe

gure.

►Fig.32

1 Thehangerpositionfromtheground

2 Thecuttingtoolpositionfromtheground

3 Thehorizontaldistancebetweenthehangerandthe

unguardedpartofthecuttingtool

Loosenthehexsocketheadboltonthehanger.Move

thehangertoacomfortableworkingpositionandthen

tighten the bolt.

DUR368A

►Fig.33: 1. Hanger 2.Hexsocketheadbolt

DUR368L

►Fig.34: 1. Hanger 2.Hexsocketheadbolt

Correct handling of the tool

WARNING: Always position the tool on your

right-hand side.Correctpositioningofthetoolallows

formaximumcontrolandwillreducetheriskofseri-

ouspersonalinjurycausedbykickback.

WARNING: Be extremely careful to maintain

control of the tool at all times. Do not allow the

tool to be deected toward you or anyone in the

work vicinity.Failuretokeepcontrolofthetool

couldresultinseriousinjurytothebystanderandthe

operator.

WARNING: To avoid accident, leave more

than 15m (50 ft) distance between operators when

two or more operators work in one area. Also,

arrange a person to observe the distance between

operators. If someone or an animal enters the

working area, immediately stop the operation.

CAUTION: If the cutting tool accidentally

impacts a rock or hard object during operation,

stop the tool and inspect for any damage. If the

cutting tool is damaged, replace it immediately.

Useofadamagedcuttingtoolmayresultinserious

personalinjury.

CAUTION: Remove the blade cover from the

cutter blade when cutting the grass.

Correct positioning and handling allow optimum control

andreducetheriskofinjurycausedbykickback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DUR368A Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info