Bedienungsanleitung Makita LS1219L (Seite 19 von 192) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691824

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

19 ENGLISH

INSTALLATION

Installing the grip

Screw the threaded shaft of the grip into the turn base.

►Fig.4: 1. Grip 2. Turn base

Installing the dust extraction hose

Connect the dust extraction hose to the tool as

illustrated.

Makesurethattheelbowandthesleevetproperlyto

the ports of the tool.

►Fig.5: 1. Dust extraction hose 2. Elbow 3. Sleeve

4. Port

Bench mounting

When the tool is shipped, the handle is locked in the

lowered position by the stopper pin. While lowering the

handle slightly, pull the stopper pin and rotate it 90°.

►Fig.6: 1. Locked position 2. Unlocked position

3. Stopper pin

This tool should be bolted with four bolts to a level and

stable surface using the bolt holes provided in the tool's

base.Thiswillhelppreventtippingandpossibleinjury.

►Fig.7: 1. Bolt

WARNING: Ensure that the tool will not move

on the supporting surface. Movement of the miter

saw on the supporting surface while cutting may

resultinlossofcontrolandseriouspersonalinjury.

FUNCTIONAL

DESCRIPTION

WARNING: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool. Failure to switch off

and unplug the tool may result in serious personal

injuryfromaccidentalstart-up.

Blade guard

►Fig.8: 1. Blade guard

When lowering the handle, the blade guard rises auto-

matically. The guard is spring loaded so it returns to

its original position when the cut is completed and the

handle is raised.

WARNING: Never defeat or remove the blade

guard or the spring which attaches to the guard.

Anexposedbladeasaresultofdefeatedguarding

mayresultinseriouspersonalinjuryduringoperation.

In the interest of your personal safety, always maintain

thebladeguardingoodcondition.Anyirregularopera-

tion of the blade guard should be corrected immediately.

Check to assure spring loaded return action of guard.

WARNING: Never use the tool if the blade

guard or spring are damaged, faulty or removed.

Operation of the tool with a damaged, faulty or

removedguardmayresultinseriouspersonalinjury.

If the see-through blade guard becomes dirty, or saw-

dust adheres to it in such a way that the blade and/or

workpiece is no longer easily visible, unplug the saw and

clean the guard carefully with a damp cloth. Do not use

solvents or any petroleum-based cleaners on the plastic

guard because this may cause damage to the guard.

If the blade guard is especially dirty and vision through

the guard is impaired, unplug the tool and use the sup-

plied wrench to loosen the hex bolt holding the center

cover. Loosen the hex bolt by turning it counterclock-

wise and raise the blade guard and center cover. With

the blade guard so positioned, cleaning can be more

completelyandefcientlyaccomplished.Whencleaning

is complete, reverse procedure above and secure bolt.

Do not remove spring holding blade guard. If guard

becomes discolored through age or UV light exposure,

contact a Makita service center for a new guard. DO

NOTDEFEATORREMOVEGUARD.

►Fig.9: 1. Center cover 2. Hex wrench 3. Blade

guard

Kerf boards

This tool is provided with the kerf boards in the turn

base to minimize tearing on the exit side of a cut. The

kerfboardsarefactoryadjustedsothatthesawblade

doesnotcontactthekerfboards.Beforeuse,adjustthe

kerf boards as follows:

►Fig.10: 1. Kerf board

►Fig.11: 1. Left bevel cut 2. Straight cut 3. Right

bevel cut 4. Saw blade 5. Blade teeth

6. Kerf board

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita LS1219L Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info