Bedienungsanleitung Marantz SR-7200 (Seite 20 von 39) (Englisch)

6590

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

ENGLISH

STATION NAME PRESET (on PRESET display mode)

The station name preset function allows the name of each preset

channel to be entered using alphanumeric characters. The Station

Name button is valid only in the tuner mode. Before station name

preset operation, store stations with the preset memory operation.

1. Press the MEMORY button !4 on the front panel or MEMO button

⁄6 on the remote for more than 3 seconds.

2. The left most column of the station name indicator flashes,

indicating the character entry ready status.

[Operation (Using the SR7200)]

3. When you press the TUNING/PRESET or buttons !5 is

turned, alphabetic and numeric characters will be displayed in the

following order:

A → B → C ...Z → 1 → 2 → 3..... 0 → – → + → / → (Blank) → A

UP →

← DOWN

4. After selecting the first character to be entered, press the

MEMORY button !4. The entry in this column is fixed and the next

column starts to flash. Fill the next column and press the

MEMORY button !4 for more than 1 second to confirm the entry.

[Operation (Using the remote unit)]

First, press the TUNER button on the remote control unit.

(This operation is not necessary if the remote control unit has

already been operated in the TUNER mode.)

3. Enter the character using the ten keypad ⁄7. For example, to

enter “A”:

1) Press the “1” button. “A” appears on the display column.

2) Every time the 1 button is pressed, the displayed character

changes in the order: A → B → C → 1 → A...

Pressing buttons other than the “1” button cause different

characters to be displayed in a similar way, so that other

alphanumeric characters can be entered. To enter a blank or

space, press the “9” button.

4. When the desired character is displayed, press the MEMO button

⁄6 to confirm the entry in this column and move to the next

column. After having filled all of the 8 columns, press the MEMO

button ⁄6, for more than 1 second to confirm the entry.

PLAYBACK OPERATION

NORMAL PLAYBACK

1. Press the POWER ON button on the remote.

2. Press the FUNCTION SELECTOR button t on the front panel or

press the FUNCTION button , on the remote unit to select an

input source.

3. Turn the SURROUND MODE SELECTOR knob e on the front

panel or Surround mode buttons ⁄7 in the AMP MODE on the

remote unit to select the desired surround mode.

4. Adjust the volume level using the VOLUME knob r on the front

panel or press the VOL / button . on the remote. If

necessary, adjust the tone, select the TRB+, TRB– and BAS+,

BAS– by the Jog Dial n and press ENT button m in the AMP

MODE on the remote unit.

Notes:

• In case of remote control operation, press one of the function

buttons twice within 2 seconds to select the function.

• Tone control is available for following surround modes.

AUTO (except 96 kHz), STEREO, DOLBY PRO LOGIC and DTS.

LISTENING TO A DIFFERENT AUDIO SOURCE WHILE

WATCHING A VIDEO SOURCE (Using the remote control

unit)

1. Select one of the following video sources

TV, DVD, VCR1, DSS/VCR2 or AUX.

2. Next, select one of the following audio sources

FM, AM, CD, TAPE, or CD-R/MD.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-7200 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-7200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info