Bedienungsanleitung Marantz SR-7200 (Seite 21 von 39) (Englisch)

6590

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

ENGLISH

OTHER FUNCTIONS

SETTING THE SLEEP TIMER

Set the sleep timer while the power is turned on.

1. Turn the power ON and press the SLEEP button o.

2. Press the SLEEP button o the number of times to set the desired

sleep time in minutes.

Each press of the SLEEP button o or changes the display in the

following order:

The unit will shut off in the number of minutes indicated.

* While the sleep timer is activated, the remaining time can be

displayed for approximately 2 seconds by pressing the SLEEP

button o.

* To cancel the sleep timer, press the SLEEP button o and then

press the CLEAR button !3.

TV AUTO ON/OFF FUNCTION

This function allows the component connected to the TV IN jack to

control the power (ON/OFF) to the SR7200.

AUTO POWER ON

1. Be sure TV auto mode is enable. (Refer page 9 : System Setup 1/3)

2. Connect your TV TUNER (etc) to the TV IN terminal.

Be sure to connect the video input.

3. Turn OFF the power to the TV TUNER and the SR7200 will be in

standby mode.

4. Turn ON the TV TUNER and tune in a receivable station.

5. When the station is received, the SR7200 turns ON and TV is

selected automatically.

AUTO POWER OFF

1. In the above situation, turn the TV TUNER OFF or select a

channel that does not contain any broadcast.

2. The SR7200 switches to STANDBY after approximately 5

minutes.

Note:

AUTO POWER OFF is canceled if the FUNCTION SELECTOR

button t is set to a source other than TV. The function reactivates

when TV is selected again.

Caution:

Some TV broadcasts may cause the TV AUTO FUNCTION to be

turned enable. To set this function to ENABLE/DISABLE, refer to

the SETUP MENU.

10 20 30

(OFF) 90 60

MULTI ROOM SELECTOR

The Multi Room Selector is a function which allows you to listen to the

same or a different source in a room other than the room in which the

SR7200 is located. To use this function, a multi room remote unit and

remote control signal receiver available from your Marantz dealer are

necessary. The operations possible with the multi room function are

explained briefly below. For details, refer to the instruction manual

supplied with the multi room remote control unit and receiver.

MULTI ROOM SELECTOR OPERATION

1. Press the MULTI ROOM button !1. The unit enters multi room

mode and the display indicates “SEL SOURCE” and flashes the

“MULTI ROOM” indicator for approx. 5 seconds. In this time, you

can select the input source by pressing the FUNCTION

SELECTOR button t.

2. Then, the display indicates “M/VOL xx dB”. At this time, you can

set the volume level of the multi room by turning the volume

control knob.

3. Then, the display indicates “M/SLEEP OFF” and you can set

sleep timer for multi room by pressing by the SLEEP button o

MULTI ROOM SELECTOR OPERATION (USING THE MULTI

ROOM REMOTE CONTROL UNIT)

1. If Video output for multi room is connected to the TV in your

second zone, the on screen display for this video signal will be

shown as follow.

2. Press the MULTI ROOM button !1, the POWER ON button, or

select the desired source on multi room remote control unit from

the MULTI ROOM. Any of these operations will put the SR7200

into multi room mode and “MULTI ROOM” indicator will light and

OSD system for the TV in the multi room will be shown.

3. Press the VOL.UP or VOL.DOWN button on the multi room

remote control unit to set the desired sound volume.

4. In multi room mode, the multi room remote control unit can be

used in the multi room to operate the following functions.

You can select a tuner preset channel and tuning up or down, and

direct selection. And you can control the CD player, DVD player

VCR and tape deck connected to the SR7200.

5. Additionally, SLEEP timer function for multi room is available from

second zone, by the same way as setting the sleep timer for main

room.

6. The status of the main room setting can be monitored from the

second zone with the OSD.

Caution:

If the main room and the secondary room are listening to the same

source, the main room will have priority over controlling that

source. For example, you cannot change the frequency or preset of

the Tuner from a remote location if the main room is also listening

to that source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-7200 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-7200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info