Bedienungsanleitung Marantz SR5004 (Seite 45 von 96) (Englisch)

522801

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

ADVANCED

OPERATION

ENGLISH

ADVANCED OPERATION

LIP.SYNC

Depending on the image device (TV, monitor,

projector, etc.) connected to the unit a time lag

can occur between image signal processing and

audio signal processing. Though minor, this time

lag can interfere with movie and music enjoyment.

The LIP.SYNC feature delays the audio signal with

respect to the image signal output from the unit

to correct the time lag between the sound and

image. It can be operated with the “LIP SYNC” and

1 and 2 cursor buttons of the remote controller.

Set the remote controller to the AMP mode before

operating the LIP.SYNC feature. The initial setting is

OFF (0 ms).The time lag can be adjusted in 10 ms

steps up to 200 ms.

Watch the picture on the image device (i.e., TV,

monitor, projector, etc.) as you adjust the time lag.

Notes

• The LIP.SYNC feature turns OFF (0 ms) in

the SOURCE/PURE DIRECT mode. When the

SOURCE/PURE DIRECT mode is deactivated, the

set value of the LIP.SYNC feature is automatically

restored.

• Even if you do not correct the time lag manually

this way, audio and video are automatically

synchronized when the unit is connected to TV

or Projector supporting Auto Lipsync Correction

in HDMI 1.3a. For instructions on Auto Lipsync

Correction, see page 36.

USING THE SLEEP TIMER

To program this unit for automatic standby, press

the SLEEP button on the remote controller.

Each press of the button will increase the time

before shut down in the following sequence.

OFF 10 20 30 5040

100 90 80 70 60110120

The sleep time will be shown for a few seconds in

the display on the front panel, and it will count down

until the time has elapsed.

When the programmed sleep time has elapsed, the

unit will automatically turn off.

Note that the SLEEP indicator on the display will

illuminate when the Sleep function is programmed.

To cancel the Sleep function, press the SLEEP

button until the display shows “SLEEP OFF” and

the SLEEP indicator will disappear.

FRONT KEY (BUTTON) LOCK OF THE UNIT

To lock all front panel buttons (except the POWER ON/

OFF button) and the INPUT SELECTER and VOLUME

knobs, hold the PURE DIRECT and EXIT buttons on

the front panel simultaneously for at least 3 seconds.

At this time, “F-KEY LOCK!” is displayed.

To unlock the controls, press the same buttons

again simultaneously for at least 3 seconds. At

this time, “F-KEY UNLOCK” is displayed, and the

buttons are released.

SURR.

MODE

PURE

DIRECT

EXIT CLEAR

DUAL BACKUP MEMORY

The unit stores settings information in nonvolatile

memory even when the main power supply is turned

off. Using the Dual Backup Memory function, you

can write settings information to another memory

area to back up saved settings for recovery anytime

as needed.

BACKUP

Set up the unit in the state for which you want to

store the settings. Hold the MEMORY and ENTER

buttons on the front panel simultaneously for at

least 3 seconds.

“MEMORY SAVING” is displayed and the unit’s

settings are saved. The stored settings information

is retained until Dual Backup Memory is used again

and the information is overwritten.

MEMORY SAVING

Note

The following settings values cannot be backed up,

each Volume value is set to Minimum.

• Main ZONE Volume

• ZONE A Volume

• ZONE Speaker A Volume

RECOVERY OF MEMORY

Recover backed up settings as follows.

Hold the MEMORY and MENU buttons on the front

panel simultaneously for at least 3 seconds.

“MEMORY LOAD” is displayed and the unit’s

stored settings are reapplied.

The unit temporarily enters standby mode. If there

is no backup data, “NO BACKUP” is displayed and

no data is recovered.

MEMORY LOAD

NO BACKUP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5004 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info