Bedienungsanleitung Marantz SR5004 (Seite 46 von 96) (Englisch)

522801

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

ADVANCED

OPERATION

ENGLISH

ADVANCED OPERATION

VIDEO CONVERT

ANALOG VIDEO CONVERSION

This unit is equipped to convert video signals for

monitor output. Because of this, indifferent of

the connection (VIDEO, S-VIDEO, COMPONENT

VIDEO) between the playback device and this unit,

listening and viewing are possible with a single

higher grade cable between the MONITOR OUT

terminal of the unit and the monitor.

UP-CONVERSION FROM ANALOG VIDEO

SIGNALS TO HDMI

The up-conversion feature of this unit can output

the input analog video signals (for component

video signals of 480i/576i, 480p/576p, 1080i and

720p resolution, and S-Video and Video (composite)

of 480i/576i resolution) to the HDMI MONITOR

terminal.

Notes

• HDMI video input is only output to the HDMI

MONITOR OUT terminal of the unit. If connecting

a playback device such as a DVD player to the

HDMI input jack, connect the HDMI MONITOR

OUT terminal of the unit to a TV monitor.

• This mode is unavailable for the REC out

terminal.

• This mode is unavailable for still picture, fast

forward and reverse play on video component.

•

If, while attempting to use the video convert feature,

the unit cannot synchronize with the display device,

“NO SIGNAL” appears on the monitor or noise is

generated, this feature cannot be used. All of these

signs are caused by equipment incompatibility;

there is nothing wrong with the unit.

If this occurs, set “VIDEO CONVERT” in the

“VIDEO SETUP” menu to “DISABLE”. Next,

connect the video input signal to the display

component via the MONITOR OUT terminal under

VIDEO and the S-video input signal to the display

component via the MONITOR OUT terminal under

S-VIDEO.

• The video convert feature constantly monitors

input video signals and determines whether to

convert the input signals or not. However, some

input video signals cannot be detected correctly.

If this occurs, set “VIDEO CONVERT” in the

“VIDEO SETUP” menu to “DISABLE”.

CONNECTION EXAMPLE

• When a monitor is connected to the HDMI

MONITOR OUT terminal of the unit

VIDEO

or S-VIDEO

or component

HDMI

or HDMI

Notes

• If the resolution of the component video signal

input from the playback device is other than

480i/576i, 480p/576p, 1080i or 720p, images

are not output from the HDMI MONITOR OUT

terminal of the unit.

• If the resolution of the Video signal input from the

playback device is other than 480i/576i, images

are not output from the HDMI MONITOR OUT

terminal of the unit.

• When a monitor is connected to the

VIDEO MONITOR OUT terminals of the

unit

VIDEO

or S-VIDEO

VIDEO

or component

HDMI

Notes

• The HDMI video signal input from the playback

device is not output from the VIDEO MONITOR

OUT terminals of the unit.

• If the resolution of the component video signal

input from the playback device is other than

480i/576i, it is not output from the VIDEO

MONITOR OUT terminals of the unit.

• When a monitor is connected to the

COMPONENT VIDEO MONITOR OUT

terminal of the unit

VIDEO

or S-VIDEO

component

or component

HDMI

Note

• The HDMI video signal input from the playback

device is not output from the COMPONENT

VIDEO MONITOR OUT terminal of the unit.

Note of OSD menu system

• The setup menu can be displayed through all

video out terminals (“HDMI”, “COMPONENT”

and “VIDEO”).

I/P CONVERT

The video circuit of the unit is equipped with an I/P

conversion feature.

When this feature is on, 480i/576i analog video

signals (VIDEO, S-VIDEO or COMPONENT VIDEO)

input from a playback device can be converted

to 480p/576p and progressively output to the

COMPONENT VIDEO or HDMI MONITOR OUT

terminals of the unit.

(For setting instructions, see page 35)

Note

When a monitor is connected to the HDMI MONITOR

OUT terminal, and HDMI RESOLUTION is set to

720p, 1080i, 1080p, or AUTO, the I/P CONVERT

for COMPONENT VIDEO OUTPUT does not

function.

HDMI OUT (SR6004 ONLY)

HDMI OUTPUT 1 or 2 can be selected and used

with this unit.

Each time the HDMI button on the remote controller

is pressed, OUTPUT 1 is switched to OUTPUT 2 or

vice versa.

HDMI OUT 1 and HDMI OUT 2 cannot be output

simultaneously.

HDMI-O = OUT1

HDMI RESOLUTION

This function is used to output the analog video

signal to HDMI as follows.

• 480i/576i signals can be converted to 480p/576p,

1080i, 720p or 1080p signals, while 480p/576p

signals can be converted to 1080i, 720p or 1080p

signals.

• 720p signals can be converted to 1080i or

1080p.

• 1080i signals can be converted to 1080p.

• The output resolution can be set for HDMI OUT 1

and HDMI OUT 2. (SR6004 only)

Notes

• Do not set to 1080i, 720p or 1080p when

connected to a monitor that does not support

1080i, 720p or 1080p signals. The SETUP MENU

will not be displayed. If the SETUP MENU is not

displayed, change settings while viewing the main

unit display panel.

• The resolution of analog component output

cannot be changed.

• HDMI OUT 1 and HDMI OUT 2 cannot be output

simultaneously. (SR6004 only)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5004 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info