Bedienungsanleitung Marquant mcr-1290 (Seite 12 von 34) (Holländisch, Französisch)

163890

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

1111

1616

5.5 Playback in Scan Mode

1. In the state of VCD/CD disc playing, press the INT button to play the previous

15 seconds part of each track on the disc. Press the INT button again to

resume normal playback.

2. In the state of DVD/MP3/WMA disc playing, the INT button is not available.

5.6 Playback from a specified chapter/track or a specified time

1. In the state of DVD disc playing, press the SEARCH button to display a

interface and highlight the title item, then use the number buttons to input

the serial number of the title; use the direction buttons to highlight the chapter

item, then use the number buttons to input the serial number of the chapter;

you can still use the direction buttons to highlight the time item, then use the

number buttons to input the desired time to start playback; finally press the

OK or PLAY button to play the selected chapter or play from the selected time.

2. In the state of VCD/MP3/WMA/CD disc playing, press the SEARCH button to

display a interface and highlight the track item, then use the number buttons

to input the serial number of the track; you can still use the direction buttons

to highlight the time item, then use the number buttons to input the desired

time to start playback; finally press the OK or PLAY button to play the selected

track or play from the selected time.

5.7 Playback in Random

In the state of DVD/VCD/MP3/WMA/CD disc playing, press the RDM button

to switch between RANDOM (ON)/RANDOM OFF. When in RANDOM (ON)

mode, it will play in random.

5.8 Playback in Different Angle

1. In the state of VCD/MP3/WMA/CD disc playing, the ANGLE button on the

IR remote controller is not available.

2. In the state of DVD disc playing, press the ANGLE button repeatedly on

the IR remote controller to view in different angle.(This function is only

for the DVD discs with ANGLE function)

5.9 Playback in Zoom Mode

In DVD/VCD mode, during playback, press the ZOOM button continuously

to enlarge a certain area of the images on the screen with these multiples:

7. PTY (PROGRAM TYPE) BUTTON

Press the PTY button shortly to display PTY and flash NEWS. Press the PTY

button hold to display NEWS and then press the VOL+ or VOL- button on the

remote controller or rotate the VOL knob on the front panel to select one of

PTY programs: -->NEWS--> AFFAIRS-->INFO-->SPORT-->EDUCATE-->

DRAMA-->CULTURE -->SCIENCE--> VARIED-->POP M -->ROCK M-->

EASY M-->LIGHT M--> CLASSICS-->OTHER M-->WEATHER-->FINANCE

-->CHILDREN-->SOCIAL -->RELIGION-->PHONE IN-->TRAVEL-->

LEISURE--> JAZZ-->COUNTRY-->NATION M-->OLDIES-->FOLK M-->

DOCUMENT -->TEST-->ALARM-->

After selecting one of the PTY programs, press the PTY button to search for

the station of the PTY program.

8. AF [ALTERNATIVE FREQUENCIES] BUTTON

When pressed the AF button short, the AF switching mode is selected and

the state of the AF switching mode is displayed by AF segment in display.

Segment off: AF switching mode off.

Segment on: AF switching mode on, and has RDS information.

Segment flashing: AF switching mode on, but RDS information is not

received yet.

When the AF switching mode is selected, the radio checks the signal strength

of the AF all the time. The interval of checking time of each AFs depends on

the signal strength of the current station, from a few minute for the strong

station to a few seconds for the weak station. Every time that a new AF is

stronger than the current station, it switches over to that frequency for very

short time, and the NEW FREQUENCY is displayed for 1-2 second. Because

the mute time of the AF switching or the checking time is very short, it is

almost inaudible in case of normal program. (When AF flash on LCD, it will

search for the stronger RDS station. If AF and TP flash on LCD, it can only

search for the traffic announcement station).

In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can

only receive and save the RDS program.

9. TA [TRAFFIC ANNOUNCEMENT] BUTTON

Press the TA button shortly to turn on TA search mode.

When traffic announcement is transmitted:

1).If the unit is in Disc Play mode, it will switch to radio mode temporarily.

2).Temporarily switch over to an EON linked station when EON detects a

traffic announcement on that other program, and TA, TP will be displayed

on LCD

* TA interruption function:

The current traffic announcement is cancelled by pressing TA button

shortly.

* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received

or saved only when traffic program identification code has been received.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marquant mcr-1290 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info