Bedienungsanleitung Marquant mcr-1290 (Seite 13 von 34) (Holländisch, Französisch)

163890

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

1212

1515

During slow forward, press the PLAY button to resume normal playback.

The function is only for video.

5.3 Playback with still frame

If the unit is currently running DVD/VCD disc, press the STEP button

consecutively to display the still frame forward with step by step.

Press the PLAY button to resume normal playback.

5.4 Playback Repeatedly

5.4.1 ONE/ALL Repeat

1. In the mode of DVD disc playback:

Press the RPT button to select RPT CHAPTER, RPT TITLE and RPT

OFF.

2. In the mode of VCD(PBC OFF)/CD disc playback:

press the RPT button to select RPT 1, RPT ALL or OFF.

When it is in the state of PBC ON, during VCD disc playing, the RPT

button are not available.

3. In the mode of MP3/WMA disc playback:

Press the RPT button to select RPT 1, RPT DIR, RPT ALL and OFF.

5.4.2 A-B Repeat

Press the A-B button if you want to repeat a specific segment on a disc

that you define:

1. Press the A-B button at a point (A) where you want it to be the start point

of the repeat segment. Press the A-B button again at a point (B) where you

want it to be the terminal point of the repeat segment. Then it will play the

segment repeatedly.

2. To cancel the A-B repeat mode and resume normal playback, press the A-B

button for the third time.

Note:

During VCD/MP3/WMA/CD playback, points A and B must be within the

same track.

During DVD playback, points A and B can be selected from different chapters.

4. Basic Disc or USB Operation

4.1 Begin playback

1. Press the POWER button briefly to turn on the DVD player.

After turning on the DVD player, please turn on TV set, and ensure that the

video output of TV is the video input from the DVD player connected with TV

set.

? Common Question

Q: There is not anything is displayed on TV screen when the DVD player is

turned on. How to solve the problem?

A: Ensure that the TV was set to right video input(not TV channel); for

example, if you make VIDEO1 INPUT of TV and DVD player connected

with each other, then you need set TV to VIDEO1.

2. Press the EJECT button to slide down the front panel.

3. Insert Disc Into Disc Compartment(Label surface up), then the front

panel will slide back to the previous angle.

! NOTE

1. For some discs that are seriously scratched or poor manufacturing or

recording quality, it may not play.

2. If the player can not read disc under normal condition, please try to

eject and reload the disc again.

3. Remark:

1) In addition to normal CD and DVD, this unit supports to play CD-R,

CD-R/W, DVD-R and DVD-R/W as well; however, depending on the

conditions of the recording equipment, recording program or the disc

itself, some CD-R, CD-R/W, DVD-R or DVD-R/W may not play.

2) When dealing with CD-R, CD-R/W, DVD-R or DVD-R/W recording,

too high recording speed may result in poor signal quality and therefore,

it is recommendable to select as lower as possible recording speed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marquant mcr-1290 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info