Bedienungsanleitung Matrix T50x (Seite 3 von 11) (Englisch)

664315

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

2 3

CHAPTER 1: Important Safety Instructions

1.1 BEFORE GETTING STARTED

It is the sole responsibility of the purchaser of Matrix Fitness Systems

products to instruct all individuals, whether they are the end user or

supervising personnel, on proper usage of the equipment.

It is recommended that all users of Matrix Fitness Systems exercise

equipment be informed of the following information prior to its use.

1.2 PROPER USAGE

• Do not use the equipment in any way other than designed or intended by

the manufacturer. It is imperative that all Matrix Fitness Systems

equipment is used properly to avoid injury.

• Keep hands and feet clear of moving parts at all times to avoid injury.

• Unsupervised children must be kept away from this equipment.

• Do not wear loose clothing while on equipment.

1.3 READ AND SAvE THESE INSTRUCTIONS

This Treadmill is intended for commercial use. To ensure your safety and

protect the equipment, read all instructions before operating the

MATRIX treadmill.

Please leave a 78.75” (2000 mm) x 39.50” (1000 mm) landing zone

behind the treadmill. This zone is to allow easy access to the treadmill and

gives the user an easy exit path from the machine. In case of an emergency,

place both hands on the side arm rests to hold yourself up and place your

feet onto the side rails.

When using an electrical product, basic precautions should always be

followed including the following:

DANGER: To reduce the risk of electric shock: Always unplug this

equipment from the electrical outlet immediately after using and

before cleaning.

WARNING: To reduce the risk of burns, fire, electrical shock or injury

to persons that may be associated with using this product:

• An appliance should never be left unattended when plugged in. Unplug from

outlet when not in use and before putting on or taking off parts.

• This product must be used for its intended purpose described in this

owner’s manual. Do not use other attachments that are not recommend by

the manufacturer. Attachments may cause injury.

• To prevent electrical shock, never drop or insert any object into any opening.

• Do not remove the console covers. Service should only be done by an

authorized service technician.

• Never operate the treadmill with the air opening blocked. Keep the air

opening clean, free of lint and hair.

• Never operate product if it has a damaged cord or plug, if it is working

improperly, if it has been damaged, or immersed in water. Return the unit

to a service center for examination and repair.

• Do not carry this unit by it’s supply cord or use the cord as a handle.

• Keep any power cord away from heated surfaces.

• Close supervision is necessary when treadmill is used by or near children or

disable persons.

• Do not use outdoors.

• The treadmill shall be installed on a stable base.

• Do not operate where aerosol (spray) products are being used or when

oxygen is being administered.

• To disconnect, turn all controls to the off position, then remove the plug

from outlet.

• Connect this treadmill to a properly grounded outlet only.

• This appliance is not intended for use by persons with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge unless

they have been given supervision or instruction concerning use of the appli-

ance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the

appliance.

• If the supply cord is damaged, it must be replaced by a special cord or

assembly available from the manufacturer or its service agent.

WARNING: Heart rate monitoring systems may be inaccurate. Over

exercise may result in serious injury or death. If you feel faint stop exercising

immediately.

SAvE THESE INSTRUCTIONS

1000 mm

2000 mm

1000 mm

305 mm

CHAPTER 1: Important Safety Instructions

1.4 ELECTRICAL REqUIREMENTS

For your safety and to ensure good treadmills performance, the ground on

this circuit must be no-looped. Before connecting the plug into an electri-

cal outlet, make sure that the voltage requirements match that the voltage

of the treadmill.

ATTENTION: Your treadmill is provided with a power cord. Please

only use with the power cord as supplied, or with Matrix spare part, other-

wise this may result in damage.

120v UNITS

The Matrix T50X, T50X-U 120 treadmill is for use on a nominal 120-volt

circuit and has a non-looped grounding plug. Make sure that the 120-volt

treadmill is connected to an outlet, NEMA 5-20R, having the same configu-

ration as the plug. No adapter should be used with this product.

220v UNITS

The Matrix T50X, T50X-U 220 treadmill is for use on a nominal 220-volt

circuit and has a non-looped grounding plug. Make sure that the 220-volt

treadmill is connected to an outlet, NEMA 6-20R, having the same

configuration as the plug. No adapter should be used with this product.

1.5 GROUNDING INSTRUCTIONS

The treadmill must be grounded. If it should malfunction or breakdown,

grounding provides a path of least resistance for electric current to reduce

the risk of electric shock. The treadmill is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances. If the user does not follow

these grounding Instructions, the user could void the Matrix

limited warranty.

DANGER: Improper connection of the equipment-grounding conduc-

tor can result in the risk of electric shock. Check with a qualified electrician

or serviceman if the user is in doubt as to whether the product is properly

grounded. Do not modify the plug provided with the product if it will not fit

the outlet; have a proper outlet installed by a qualified technician.

2.1 RECOMMENDED CLEANING TIPS

1. Use a soft, clean cotton cloth. DO NOT use paper towels to clean

surfaces on the treadmill. Paper towels are abrasive and can

damage surfaces.

2. Use a mild soap and damp cloth. DO NOT use ammonia based cleaner.

This will cause discoloring of the aluminum and plastics it comes into

contact with.

3. Do not pour water or cleaning solutions on any surface. This could

cause electrocution.

4. Wipe the console and side rails after every use.

5. Brush away any wax deposits from the deck and belt area. This is a

common occurrence until the wax is worked into the belt material.

6. Be sure to remove any obstructions from the path of the elevation

wheels including power cords.

7. Monthly, unplug the treadmill and remove the motor cover. Check for

debris and clean with a dry cloth or small vacuum nozzle.

WARNING: Do not plug the treadmill in until the motor cover has

been reinstalled.

CAUTION: Be sure to have proper assistance to install and move the

unit in order to avoid injury or damage to the treadmill.

2.2 DECK AND BELT REPLACEMENT

One of the most common wear and tear items on a treadmill is the deck and

belt combination. If these two items are not properly maintained they can

cause damage to other components. This product has been provided with

the most advanced maintenance free lubricating system on the market. The

Matrix Ultimate Deck™ does not require any maintenance, other than

cleaning and belt tightening, for up to 25,000 miles.

WARNING: Do not run the treadmill while cleaning the belt and

deck. This can cause serious injury and can damage the machine.

Maintain the belt and deck by wiping the sides of the belt and deck with a

clean cloth. The user can also wipe under the belt 2 inches on both sides

removing any dust or debris.

The deck can be flipped and reinstalled or replaced by an authorized service

technician. Please contact Matrix Fitness Systems for more information.

2.3 CHECK FOR DAMAGED PARTS

DO NOT use any equipment that is damaged or has worn or broken parts.

Use only replacement parts supplied by Matrix Fitness Systems.

MAINTAIN LABELS AND NAMEPLATES. Do not remove labels for any

reason. They contain important information. If unreadable or missing,

contact Matrix Fitness Systems for a replacement or an authorized

service provider.

MAINTAIN ALL EqUIPMENT Preventative maintenance is the key to

smooth operating equipment, as well as keeping the users liability to a

minimum. Equipment needs to be inspected at regular intervals. Defective

components must be replaced immediately. Improperly working equipment

must be kept out of use until it is repaired. Ensure that any person(s)

making adjustments or performing maintenance or repair of any kind is

qualified to do so. Matrix Fitness Systems will provide service and

maintenance training at our corporate facility upon request or in the field if

proper arrangements are made.

CHAPTER 2: Preventative maintenance

Matrix T50x Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info