Bedienungsanleitung Maxdata SN 40 (Seite 76 von 85) (Englisch)

650496

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

76 77MAXDATA SN 40 M1 – User GuideProtecting Local Disks

6. When you have finished viewing or copying all the desired data, select the backup in the

“Backups” list and click “Close View”.

The Windows Explorer window closes automatically, and the “Backup View Open” column for

the selected backup now displays “No”.

Recovering a Non-system Disk or Partition

You can recover a non-system disk or partition only as long as that disk or partition is not currently

being backed up, and only as long as a more recent backup view is not open. For example, if you

created backups on Monday and Tuesday, and Tuesday’s backup view is open, you cannot recover

Monday’s backup until you close Tuesday’s view.

In addition, if you recover a partition and other partitions of that same disk are also protected, protection

for those other partitions temporarily stops until the selected partition is recovered.

Caution

When you recover a disk or partition, you will lose any data that was written to the disk after the time of

the selected backup, as well as any backups that were performed after the backup you’re recovering.

You might want to copy any newer files that you want to keep to another disk before you recover the

disk. To copy files from a backup, refer to “Recovering Files from a Backup” on page 75.

In addition, if network errors occur or the storage system shuts down during recovery, your operating

system might become unstable, and you will have to recover it using the recovery CD (or re-install

the operating system if you did not protect your system disk).

Be sure to recover your disks or partitions only when your environment is stable.

To recover a non-system disk or partition:

1. Click “Restore”.

2. In the “Protected disk” list, select the disk or partition that you want to recover.

3. If a view of a more recent backup than the one that you want to recover is open (as indicated

by “Yes” in the “Backup View Open” column), select the open backup view and click “Close

View”.

4. In the “Backups” list, select the backup that you want to recover.

5. Click “Restore Disk”.

6. When the confirmation message appears, click “Yes”.

The disk or partition is recovered to exactly its state at the date and time of the selected

backup.

To let you monitor the progress of this activity, the “Status” page appears automatically.

The “Current activity” area displays the percentage of the recovery that has completed, and

the speed at which the data is being sent over the network. The “Progress” bar graphically

indicates how much of the recovery is complete.

 Note

You can cancel this operation at any time by clicking “Stop Current Activity”. However, this will leave

the local disk or partition in an incomplete state, and you will have to recover it again before you can

use it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxdata SN 40 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info