Bedienungsanleitung Maxdata SN 40 (Seite 78 von 85) (Englisch)

650496

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

78 79MAXDATA SN 40 M1 – User GuideProtecting Local Disks

6. In the “Recovery Server” field, enter the name or IP address of the storage system where the

backups reside.

 Note

You can use the storage system name only if your network has a DNS server.

7. Make sure the selected authentication type is “CHAP”.

Client Backup and Recovery supports only “CHAP” authentication.

8. In the “Recovery Password” field, enter the recovery CD password that you specified when

you protected the disk or when you last changed the password.

If you don’t remember your password, ask your system administrator to you can change it on

the storage system (as described in “Changing the Password for Restoring Hard Disks” on

page 45) and enter the new password here.

9. In the left column, select the backup that corresponds to the disk or partition that you want to

recover.

If you protected only one disk or partition, only one item appears in this list.

If you protected multiple disks or partitions, you can identify the right item by looking at the

“Attr” and “Size” columns. The “Attr” column displays the attributes of each listed item

(“D” for disk, “P” for partition, and “S” for system disk). For example, if you protected both

a system disk and a data disk, the system disk will be labeled “S”, and the data disk will be

labeled “D”. If you protected disks of different sizes, the “Size” column (which displays the

number of megabytes) can also help you identify the right backup.

10. In the right column, select the date and time of the backup that you want to recover.

In general, selecting “Base Disk” is the same as selecting the most recent backup. However,

if your system crashed during the last backup, the base disk will be in an incomplete state. In

that case, be sure to select one of the listed backup dates rather than “Base Disk”.

If you select “Base Disk”, a backup of that disk image on the storage system is created, and

this backup is recovered. As a result, if the maximum number of backups have already been

performed, the oldest backup is deleted to make room for this backup.

11. Specify whether or not to delete all backups that occurred after the selected date by selecting

or clearing “Rollback the remote disk”.

Caution

This action is not reversible. If you select this option, you will not be able to subsequently recover

from another later backup.

12. Specify whether or not to scan the differences between the backup and the disk to which you

are recovering data by selecting or clearing “Enable micro-scan”.

If you’re simply overwriting corrupted data on the same disk that you protected previously,

select this option. Client Backup and Recovery will scan both the backup and the disk, and

copy only the data that differs between the two. This can minimize the impact to the network,

although the scanning process takes some additional time.

If you’re recovering the backup to a brand new disk, clear this option. Client Backup and

Recovery will copy all the data from the backup to the new disk without doing any scanning

(there will be nothing to scan on the new disk).

13. Select “Next”.

14. Select the disk where you want to recover the data, and select “Next”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxdata SN 40 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info