Bedienungsanleitung Maxview MXL002 OMNISAT DOME (Seite 12 von 22) (Englisch)

629542

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

CONNECTION DIAGRAM - FOR SINGLE LNB VARIANT - MXL003

CONNECTIONS

Before making any connections to the unit ensure that the mains input has been disconnected. Connect to the

mains once all connections have been completed correctly. Incorrect connections may cause permanent

damage to the unit. If you are unsure on how to connect the unit contact your installer or Customer Service.

> VCR (Video Cassette Recorder) Connection

A VCR connection can be made by connecting it to the VIDEO output of the satellite receiver. The VCR OSD (On

Screen Display) menus are displayed on the TV screen. The VCR is set to on, even when the receiver is switched

off. When the receiver is off the volume of the TV is controlled by the TV, however, when the receiver is on, the

volume can be controlled using the receiver.

> TV Connection

Video RCA output should be connected to TV Video RCA inputs. Audio RCA outputs can be connected to TV

Audio RCA inputs.

> Audio Ampliﬁer Connection

Connection through RCA Outputs

You may connect your unit to an audio ampliﬁer through RCA outputs. For this purpose, use AUDIO-L and

AUDIO-R stereo outputs of your unit.



Audio Amplifer

PC Infrared Remote

Control

TV or VCR

(an additonal cable will be

required to link VCR to TV)

+12V/+24V

12 33

GAMES

> When in the “Main Menu”, go to “Games” by using

“ ”/“ ” and “✘”/“✘” buttons and press the “OK”

button. The “Games” sub-menu is entered.

ELECTRONIC PROGRAM GUIDE - EPG

Broadcasted timetables will be available with some

programs. You may use the “EPG” feature of the unit

to get this information.

> Press the “EPG” button on the remote control when

no menu is displayed. The “EPG” menu appears on

the screen.

> You will see in the “EPG” menu a list of the

channels, timetable, start and ﬁnish times, name and

summary of the channel.

> You may use “✘”/“✘” buttons to move between

channels and to display data on the screen. Every time

you change the channel, you will see a live picture of

the new channel on the upper left hand side.

> You will see the start and ﬁnish times and the day

that the timetable covers. A red line shows the cur-

rent time.

> You may use the “EPG” menu as a reminder menu.

If you select a channel other than the current channel

at a later time and press the “OK” button, its box will

become red. When it is time for the selected channel

your receiver will automatically go to that channel. To

cancel this feature, press the “OK” button again, on

the same box.

COMMON INTERFACE (OPTIONAL)

Some Troya II Digital Satellite receiver models have a

CI (Common Interface) module. CI modules are used

with a smart card.

With a correct CI module and correct smart card

existing and future scrambled channels can be

watched.

Insert the smart card into the slot in the CI module

and then select the scrambled channel. The scrambled

channel will be available in a few seconds.



✘

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxview MXL002 OMNISAT DOME Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info