657614
50
Zoom out
Zoom in
Vorherige Seite
1/129
Nächste Seite
50
a
b
c
d
Synchronizing and readjusting
Almost all brake designs have a bolt located next to one
or both brake calipers for adjusting the spring preload
(a)
. Turn the bolt slowly and watch how the gap chang-
es between brake pads and rim.
Adjust the spring in a way that with an unapplied brake
the gaps are equal on either side and the brake pads
touch the rim simultaneously during braking.
The position of the brake lever where the brake starts to
act, also referred to as the pressure point, can be adjust-
ed to the size of the hand as well as to individual conve-
nience by readjusting the brake cable. Make absolutely
sure you cannot pull the brake lever all the way to the
handlebar grip.
With an unapplied brake the brake pads should not be
too close to the rim sides, otherwise they could drag
along the rim during riding. Before doing this adjust-
ment, observe the notes in the chapter “Adjusting the
brake lever reach”.
To readjust the brakes, unscrew the knurled lock ring lo-
cated at the point where the brake cable enters the brake
lever on the handlebars
(b)
. Unscrew the knurled, slot-
ted adjusting bolt by a few turns. This reduces the free
travel of the brake lever.
Keeping the adjusting bolt firm, tighten the lock ring
against the brake lever unit. This prevents the adjusting
bolt from coming loose by itself. Ensure that the slot of
the bolt faces neither forward nor upward, as this would
permit water or dirt to enter more easily.
G
Always test the brakes’ function when sta-
tionary
(c)
after adjusting them, making sure
the brake pads engage fully with the rim
when you pull them hard.
Hydraulic rim brakes
Functioning and wear
Common hydraulic rim brakes consist of two brake as-
semblies that are mounted on the left and right side of
the rim and connected by an assembly plate and, if nec-
essary by a brake booster. W Actuating the brake lever
compresses the hydraulic pistons through oil pressure,
pushing the brake pads against the rims.
50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Merida Pedelec wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info