Bedienungsanleitung Metabo ASR 35 M ACP (Seite 19 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595131

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

ENGLISH

ENG

Emptying the Container

Only permitted for dusts with occupational

exposure limits > 1mg/m

- Unplug.

-ASR 35 M AutoClean: Remove the suction hose,

close the suction opening (14) with the sealing

plug (13).

- Open the snap locks (10). Remove the upper part

(9) from the container (11).

- Tip out the container.

Dispose of the paper filter bag/fleece filter bag.

- Unplug.

- Pull on mask.

-ASR 35 M AutoClean: Remove the suction hose,

close the suction opening (14) with the sealing

plug (13).

- Open the snap locks (10). Remove the upper part

(9) from the container (11).

- Carefully pull back and remove the paper filter

bag (8)/fleece filter bag (7) from the suction

opening (14). Seal the flange of the paper filter

bag/fleece filter bag by folding over the cover.

- Dispose of the vacuumed material in accordance

with legal regulations.

Disposing of the PE Filter Bag

- Insert mains plug.

- Switch on the vacuum cleaner and vibrate the

filters: turn the switch (2) to the "IR" position.

- Switch off the vacuum cleaner: turn the switch (2)

to the "0" position.

- Pull on mask.

-ASR 35 M AutoClean: Remove the suction hose,

close the suction opening (14) with the sealing

plug (13).

- Open the snap locks (10). Remove the upper part

(9) from the container (11). Before setting down

the upper part, turn switch (2) to the "I" position

so that any falling dust is vacuumed.

- Carefully pull back the PE filter bag (6) from the

suction opening (14). Seal the flange of the PE

filter bag by folding over the cover.

- Dispose of the vacuumed material in accordance

with legal regulations.

9.2 Special cleaning instructions for

ASR 35 M AutoClean:

In the case of class M machines, the outside of the

machine should be cleaned (vacuumed and wiped

down), or treated with sealants before being

removed from the hazardous area. All machine

parts must be considered to be contaminated when

removed from the hazardous area: suitable meas-

ures must be taken to prevent any dispersal of the

dust. When carrying out maintenance or repairs, it is

essential to dispose of any contaminated objects

that cannot be adequately cleaned. These objects

must be disposed of using impermeable bags and

in accordance with the applicable regulations for

removing such waste.

10.1 General Instructions

Before performing any maintenance, always

switch off the appliance and remove the

mains plug.

Clean the appliance (see section9).

For maintenance by the user, the vacuum cleaner

must be taken apart, cleaned and maintained, to

the extent possible, without endangering mainte-

nance staff or other people.

Preventive Measures

Appropriate preventive measures include:

cleaning the appliance before disassembly;

providing local filtered forced ventilation where the

vacuum cleaner is disassembled; cleaning of the

maintenance area and providing suitable personal

protective clothing and equipment.

10.2 Reduction in suction power

If the suction power decreases, carry out the

following steps:

1. Clean the filter cassettes by activating the elec-

tromagnetic vibrator (set switch (2) to the "IR"

position).

2. Empty the container or replace the paper filter

bag (8)/fleece filter bag (7) or PE filter bag (6).

3. Replace the filter cartridges (18)

10.3 Renew the filter cartridges (18)

Shake the filter cassettes (18) once again before

replacing the filters, by switching on the electro-

magnetic vibrator (set switch (2) to the "IR" posi-

tion).

Use a coin or a similar object to turn the locking

knob (16) on the locking bar (15) counter-clock-

wise through 90° and push the bar (15) to the rear.

Swing up the hood and pull up the filter cartridges

(18) to remove them. Seal the removed filter

cassettes immediately in a dust-tight plastic bag

and dispose of them in accordance with regula-

tions. Insert new filter cartridges, ensuring they are

correctly and securely in place.

10.4 Motor protection filter

Regularly check the motor protection filter. If the

motor protection filter (17) is contaminated, this

indicates that the filter cassettes (18) may be

defective:

- Replace the filter cartridges (18)

- Replace the motor protection filter (17), or rinse it

under running water, dry it and then replace.

10 Servicing

17027067_0711 ASR 35 L_M AutoClean ENTWURF.book Seite 19 Montag, 25. Juli 2011 4:46 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo ASR 35 M ACP Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info