Bedienungsanleitung Metabo MAG 28 LTX 32 (Seite 14 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

595085

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

ENGLISH

ENG

The ideal storage temperature is between 10°C

and 30°C.

Li-ion battery packs Li-Power (25.2 V)

have a

capacity and signal display (21):

- Press button

(20)

and the charge level is

displayed by the LEDs .

- If one LED is flashing, the battery pack is almost

flat and must be recharged.

- If all LED are flashing, the battery pack is too

warm. Allow the battery pack to cool down. You

can do this quickly using ASS 15 Plus battery

charger.

6.2 Removing and inserting the battery

pack

Removal:

Press both battery pack release buttons

(19)

and

take out battery pack

(18)

Inserting:

Slide in the battery pack (18) until it engages.

7.1 Attaching the Securing Strap

For drilling carried out on angled and vertical

surfaces and overhead, the magnetic drill

stand must be secured with the

securing strap

(28)supplied to prevent it from falling, even if the

magnet malfunctions.

Fit the

securing strap

(28) so that the

magnetic drill stand is moved away from the

operator if the magnet malfunctions.

Replace the

securing strap

(28) if it has had

to catch a falling magnetic drill stand.

Caution! Check the

securing strap

(28)

for

damage. Before using the

securing strap

(28), always check it carefully to ensure it is oper-

ating faultlessly and as specified. If the

securing

strap

(28)

is damaged or if the ratchet (27) is no

longer working properly, replace the

securing

strap

immediately.

-Fit the

securing strap

(28) on one of the two

holding points (29) of the magnetic drill stand.

- Then secure the

securing strap

to another suit-

able fastening point or to the material being

processed.

- Notes on the

securing strap

(28):

Insert the free end of the

securing strap

from

below through the opening in the ratchet shaft

and then tension the free end of the

securing

strap until it is loosely fitted.

The strap must not be tightly fitted: you

must be able to unroll the securing strap

more than one rotation about the ratchet

shaft

This is essential to ensure secure

fastening.

Tension the securing strap with a

pumping action on the ratchet lever (a).

- Ensure that the securing strap is guided to be

taut in position.

- Check that the strap connection is secure.

The

securing strap

does not replace the

magnetic force of the magnetic drill stand: it

is simply used to secure against falling in the event

of a magnet malfunction.

To loosen the

securing strap:

Caution: the tension is released in sudden

bursts! To loosen the

securing strap

, open

the ratchet fully and simultaneously use your

finger to pull the locking strap (b) upward.

7.2 Cooling Lubrication Unit for Core Drill-

ing

The tool life depends on the lubrication. Lubri-

cating the inside of the core drill bit with high-

performance cutting oils is essential for core

drilling.

To fill with oil, remove the container (4) from

the magnetic drill stand.

Fill the container with high-performance cutting oil

(4) and close the screw cap. Switch the lubrication

on or off at the supply cock (3).

For work carried out on vertical and overhanging

surfaces or overhead surfaces (and when storing

the unit in the case), the c

ontainer

(4)

must be

emptied or removed to prevent liquid from

escaping (otherwise there is a risk of

cutting oil

entering the motor and causing a short-circuit)

When carrying out this type of task, spray the

inside of the cutting edge tool before drilling with

universal cutting spray (see chapter 10 Accesso-

ries). Repeat the process several times for larger

drilling depths.

7Use

(b)

(a)

17027057_0211 MAG 28 LTX 32.book Seite 14 Dienstag, 1. März 2011 1:15 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Metabo MAG 28 LTX 32 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info