Bedienungsanleitung Midas M32 (Seite 19 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

19 M32 DIGITAL CONSOLE User Manual

The ASSIGN screen contains the following separate tabs:

home: This screen provides a general overview of the 12 assigned controls

for all three control sets at the same time.

set A: This screen allows assignment of dierent console parameters to the

12 custom controls for Set A.

set B: Works as described above, but for custom controls Set B

set C: Works as described above, but for custom controls Set C

HOME

The ASSIGN screen’s home tab provides a visual overview of the 12 assigned

controls for all three sets at the same time.

The home tab oers visual feedback of the controls that have been assigned

to all three sets of custom controls, without having to bank between the three

sets one-by-one, or relying on abbreviated syntax shown in the custom control’s

dedicated LCD displays.

To adjust the various settings on the home tab, perform the following steps:

1. Turn any of the push encoders 1-5 to move screen focus to dierent custom-

assignable rotary controls and buttons in the A, B and C sets. The controls

currently selected with each of the four rotary controls are highlighted with

an orange outline.

2. Tap any of the push encoders 1-5 to switch to the edit screen for the specic

custom control that was highlighted on the home tab screen.

SET A, B & C

The set A, B & C tabs allow mapping of specic console parameters to the eight

assignable buttons and four assignable rotary controls. Using these screens the

user can map the exact parameters that are most useful to them to the desired

controls, in the desired order.

To adjust the various settings on the set A, B & C tabs, perform the following

steps:

1. Adjust the rst push encoder to select the colour used for the LCD screens

within that set.

2. Adjust the second push encoder to select to which of the 12 assignable

controls in the appropriate set you wish to map a parameter.

3. Adjust the third push encoder to scroll through a list of parameter categories

to which the selected assignable control can be mapped. Choices for the

buttons include:

• Not Assigned

• Jump to Page

• Mute Channel

• Inserts

• Eect Button

• MIDI

• Remote.

Choices for the rotary controls include:

• Not Assigned

• Panorama

• Sends

• Dynamics

• FX Parameters

• MIDI

• Remote.

4. Tap the third push encoder to select the desired type of parameter.

5. Where applicable, tap/select the fourth, fth and sixth push encoders to

assign the specic parameter.

1.15 Mute Groups

Use these buttons to select and activate or deactivate one of the user-dened

Mute Groups.

The MUTE GRP screen allows for quick assignment and control of the console’s

six mute groups, and oers two separate functions:

1. It disables the buttons in the MUTE GROUPS section during the process

of assigning channels to mute groups. This ensures that no channels are

accidentally muted during the assignment process in a live performance.

2. It oers an alternative interface for muting or unmuting the mute groups

while the dedicated mute group buttons on the console’s control surface

areblocked.

When activated, the MUTE GRP screen only covers the bottom portion of the

Main Display, allowing the middle portion to continue displaying the usual

screencontent.

To assign channels to one of the six mute groups, perform the following steps:

1. Press the MUTE GRP screen selection button to switch the main display to

the Mute Groups view.

2. Press and hold the desired mute group button on the lower right-hand side

of the console’s control surface.

3. While holding the mute group button, press the SEL button of any input or

output channel, on any layer, that you wish to assign to that mute group.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info