Bedienungsanleitung Midas M32 (Seite 30 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

30 M32 DIGITAL CONSOLE User Manual

remote

The SETUP screen’s remote tab allows the M32 to be set up as a control surface

for various DAW recording software on a connected computer. With its large

complement of motorised faders, the console can act as an excellent controller,

allowing the user to make level adjustments quickly and easily without

usingamouse.

To adjust the various remote settings, perform the following steps:

1. Tap the rst push encoder to enable the M32’s REM - DAW REMOTE button

on the control surface. This switches various console hardware, such as

the bus faders, to control computer DAW software instead of the console’s

internal audio path.

2. Adjust the second encoder to select the specic control surface protocol

used, in conjunction with the target DAW software. Choices include:

• Mackie Crtl: Use this protocol to control any DAW software that is

compatible with a Mackie Control hardware surface

• HUI: Use this protocol to control any DAW software that is compatible

with an HUI hardware control surface, such as Pro Tools

• Midi CC: Use this protocol to control software via MIDI. More detailed

information can be found in Appendix B: MIDI Operation.

3. Tap the second encoder to assign the currently selected control

surfaceprotocol.

4. Adjust the fth encoder to select whether the remote function uses the MIDI

IN and MIDI OUT sockets, the card’s MIDI, or RTP (Real Time Protocol) MIDI.

5. Tap the fth encoder to conrm the selection.

6. Turn the sixth encoder to adjust various MIDI-based operations for the

console. Choices include:

• MIDI In/Out: This toggles the MIDI input and output on or o

• Card MIDI: Allows MIDI transmission through the DN32-USB card

• RTP (Real-Time Transport Protocol): This toggles on or o the console’s

ability to interface with an Ethernet-based MIDI system

• Rx PrgC: Toggles on or o the console’s ability to receive

ProgramChange messages

• Tx PrgC: Toggles on or o the console’s ability to send Program

Changemessages

• Rx Fader: Toggles on or o the console’s ability to receive

Fadermessages

• Tx Fader: Toggles on or o the console’s ability to send Fader messages

• Rx Mute: Toggles on or o the console’s ability to receive

Mutemessages

• Tx Mute: Toggles on or o the console’s ability to send Mute messages

• Rx Pan: Toggles on or o the console’s ability to receive Pan messages

• Tx Pan: Toggles on or o the console’s ability to send Pan messages

• X/OSC: Open Sound Control, toggles on or o the console’s ability to

communicate with the iPad application.

7. Tap the sixth encoder to toggle the currently selected MIDI option on

or o. This can be useful if you want to ensure that any connected MIDI

transmitters cannot interfere with the console.

NOTE: For more detailed information about MIDI,

seeAppendixB:MIDIOperation.

network

The SETUP screen’s network tab contains settings used when connecting the

M32 to a standard Ethernet network. The user can set parameters such as using

a xed IP address, or having one assigned, as well as setting up Ethernet and

subnet mask settings.

To set the network address for the console, perform the following steps:

1. Adjust the rst push encoder to select which specic network eld to adjust.

Choices include:

• IP address

• Subnet Mask

• Gateway.

2. Adjust encoders 2, 3, 4 and 5 to set the four numerical elds to be adjusted

for the selected network eld.

3. Tap the sixth encoder to assign the adjusted settings.

scribble strip

The SETUP screen’s scribble strips tab allows customisation for all of the M32’s

channel LCD displays, including Aux, FX, Buses, Matrices and DCAs.

On the scribble strips tab the user can make useful adjustments, such as

assigning real names to the selected channel (such as ‘drums’ or ‘backing

vocals’), as well as assigning colours to them that are then reected on the

console’s channel LCD screens.

To adjust the various LCD display settings, perform the following steps:

1. Adjust the rst push encoder to select which of the channels you wish

toedit.

2. Adjust the second encoder to set the colour for the currently selected

channel’s scribble strip.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info