Bedienungsanleitung Midas M32 (Seite 32 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

32 M32 DIGITAL CONSOLE User Manual

eects

The LIBRARY screen’s eects tab allows you to load and save presets for the

various onboard eects processors.

To adjust the various settings on the eects tab, perform the following steps:

1. Adjust the rst push encoder to select which of the eight eects slots to load

or save a preset.

• As you navigate among the eight eects slots the specic eect

processor loaded into each slot will display on the screen as both a

name and an icon.

2. To save and load presets, as well as import/export them, follow the same

procedure as detailed in the LIBRARY screen channel tab.

routing

The LIBRARY screen’s routing tab allows you to load and save presets of the

M32’s signal routings. This can be useful for repeating specic routing scenarios

that occur over and over on a regular basis, such as when using the console for a

weekly club gig or worship service.

To adjust the various settings on the routing tab, perform the following steps:

1. Adjust the rst push encoder to select which specic console signal paths

will be recalled when loading a routing preset. Choices include:

• Channel Inputs

• Analog Out

• Auxiliary Out

• P16 (Ultranet) Out

• Card Out

• AES50 Out.

2. Tap the rst encoder to turn the currently selected element on or o in the

recall list.

3. To save and load presets, as well as import/export them, follow the same

procedure as detailed in the LIBRARY screen channel tab.

2.6 Eects

The EFFECTS screen controls various aspects of the eight internal eects

processors. On this screen the user can select specic types of eects for the

eight internal processors, congure their input and output paths, monitor their

levels, and adjust the various eect parameters.

The rst four slots can be Insert and Side-Chain eects, and the slots ve to eight

are Insert only. Additionally these slots can only hold some eects excluding

reverbs and other power-intensive eects. They also have dierent selections for

the input sources.

The EFFECTS screen contains the following separate tabs:

home: The home tab provides a general overview for all eight eects

processors, displaying what eect has been inserted in each of the eight

slots, as well as displaying input/output paths for each slot, and the I/O

signal levels.

fx1-8: These eight duplicate screens display all relevant data for the right

separate eects processors, allowing the user to adjust all parameters for

the selected eect.

home

The EFFECTS screen’s home tab provides a high-level overview of the eight

eects processor slots, giving the user at-a-glance feedback on the eects they

have assigned to the slots, the console source and destination for each processor,

and the input/output levels for each processor.

To make adjustments on the EFFECTS screen’s home tab, perform the

followingsteps:

1. Adjust the rst push encoder to select the input source for the currently

highlighted eects block. Signal path choices include:

• Insert Send

• Mix Bus 1-16.

2. Tap the rst encoder to assign the currently selected input source.

3. Adjust the second encoder to select the input source for the right side of the

currently highlighted eects block.

4. Tap the second encoder to assign the currently selected input source.

TIP: To congure an eect as mono input and stereo output, set both input

sources to the same signal path

5. Tap the third and fourth encoders to mute the currently selected eect.

6. Adjust the fth encoder to scroll among the dierent audio eects available.

Choices include:

Hall Reverb Delay + Chamber M/S Fair Comp

Ambience Chorus + Chamber Dual Fair Comp

Rich Plate Reverb Flanger + Chamber Leisure Comp

Room Reverb Delay + Chorus Dual Leisure Comp

Chamber Reverb Delay + Flanger Ultimo Comp

Plate Reverb Modulation Delay Dual Ultimo Comp

Vintage Reverb Dual Graphic EQ Dual Enhancer

Vintage Room Stereo Graphic EQ Stereo Enhancer

Gated Reverb Dual TruEQ Dual Exciter

Reverse Reverb Stereo TruEQ Stereo Exciter

Stereo Delay Dual DeEsser Stereo Imager

Triple Delay Stereo DeEsser Edison EX1

Rhythm Delay Stereo Xtec EQ1 Sound Maxer

Stereo Chorus Dual Xtec EQ1 Dual Guitar Amp

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info