Bedienungsanleitung Midas M32 (Seite 28 von 61) (Englisch)

658461

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

28 M32 DIGITAL CONSOLE User Manual

Each of the two AES50 tabs contains the same following sets of parameters that

can be adjusted. To assign various console signal paths to the AES50 connectors,

perform the following steps:

1. Adjust the rst push encoder to select an 8-channel signal path that

will be sent to the rst eight channels of the AES50 connector’s output.

Choicesinclude:

• Local 1-8 • AES50-B 25-32

• Local 9-16 • AES50-B 33-40

• Local 17-24 • AES50-B 41-48

• Local 25-32 • Card 1-8

• AES50-A 1-8 • Card 9-16

• AES50-A 9-16 • Card 17-24

• AES50-A 17-24 • Card 25-32

• AES50-A 25-32 • Out 1-8

• AES50-A 33-40 • Out 9-16

• AES50-A 41-48 • P16 1-8

• AES50-B 1-8 • P16 9-16

• AES50-B 9-16 • Aux 1-6/Mon.

• AES50-B 17-24

2. Tap the rst encoder to connect the currently selected signal path to the

AES50 pathway.

3. Repeat the above process for the other ve sets of 8-channel AES50 outputs.

The aes50-b tab works exactly the same as the aes50-a tab, but instead selects

sources sent to the output of the console’s AES50-B connector.

xlr out

The ROUTING screen’s xlr out tab, much like the out 1-16 tab, allows the user to

patch the M32’s various internal signal paths to the 16 analogue XLR outputs that

are located on the console’s rear panel. This tab, however, allows the XLR outputs

to be patched in blocks of four, rather than individually. Also, on this screen it is

only possible to route the signal to its absolute destination, rather than choosing

the signal path. The available destinations will dier depending on the block

selected. Destinations include:

Block 1-4 / Block 9-12 Block 5-8 / Block 13-16

• Local 1-4 • Local 5-8

• Local 9-12 • Local 13-16

• Local 17-20 • Local 21-24

• Local 25-28 • Local 29-32

• AES50-A 1-4 • AES50-A 5-8

• AES50-A 9-12 • AES50-A 13-16

• AES50-A 17-20 • AES50-A 21-24

• AES50-A 25-28 • AES50-A 29-32

• AES50-A 33-36 • AES50-A 37-40

• AES50-A 41-44 • AES50-A 45-48

• AES50-B 1-4 • AES50-B 5-8

• AES50-B 9-12 • AES50-B 13-16

• AES50-B 17-20 • AES50-B 21-24

• AES50-B 25-28

• AES50-B 29-32

• AES50-B 33-36 • AES50-B 37-40

• AES50-B 41-44 • AES50-B 45-48

• Card 1-4 • Card 5-8

• Card 9-12 • Card 13-16

• Card 17-20 • Card 21-24

• Card 25-28 • Card 29-32

• Out 1-4 • Out 5-8

• Out 9-12 • Out 13-16

• P16 1-4 • P16 4-8

• P16 9-12 • P16 13-16

• Aux 1-4 • Aux 5-6/Mon

• Auxin 1-4. • Auxin 5-6/TB.

2.4 Setup

The SETUP screen oers various controls for global, high-level functions of

the M32, such as display adjustments, sample rates and synchronisation, user

settings, and network conguration.

The SETUP screen contains the following separate tabs:

global: This screen oers adjustments for various global preferences of how

the console operates.

cong: This screen oers adjustments for sample rates and synchronisation,

as well as conguring high-level settings for signal path buses.

remote: This screen oers dierent controls for setting up the console as a

control surface for various DAW recording software packages on a connected

computer.

network: This screen oers dierent controls for attaching the console to a

standard Ethernet network.

scribble strips: This screen oers controls for various aspects of the

console’s DCA groups.

preamps: This screen allows the gain on each of the individual input

channels’ preamps to be adjusted.

card: This screen selects the input/output conguration.

None of the SETUP screen’s tabs contain a secondary level of functionality, so the

UP/DOWN navigation controls do no need to be used for these screens.

global

The SETUP screen’s global tab allows the user to adjust various global controls

of the console, such as display brightness and contrast, the panning mode used

by channels, text languages, and more.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midas M32 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info