Bedienungsanleitung Midland BTX1 (Seite 18 von 111) (Holländisch, Portugiesisch, Finnisch)

494048

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

Midland BTX1 - 17

How to pair two BTX1 unit

The two units supplied in the same BTX1 box, are already paired and ready to use,

which mean you don’t need to perform this procedure. The unit are already paired

using the Middle button.

If the devices are not part of the same kit, or the units has been purchased sepa-

rately, you need to ﬁrst pair it in order to use it.

To pair the BTX1 to another BTX1 unit

To pair the BTX1 to another BTX1 unit, you must ﬁrst enter the setup mode:

1. Turn oﬀ the unit

2. Press and hold down the middle button about 7 sec., until the Red light is on

permanently.

3. Now press the Middle button for 3 seconds. The Blue and Red light will ﬂash.

4. Do the same procedure on the other unit, When successfully paired, each unit

will have the Blue light on for one second and than go back to the setup mode

(Red light always on).

5. Now the pairing procedure is complete, you just need to exit the setup mode

before you can use the units:

6. Double click on the Middle button, the Red light will turn oﬀ and the Blue

light will start ﬂashing.

You can use now your BTX1.

How to use the Intercom

To use the intercom feature, be sure the both units are turned on and correctly

paired together.

Manual activation

Press the Middle button on one of the two units. Communication is enabled and

remains active until you press again the middle button. The intercom need some

second to activate, you will hear a beep tone when the intercom is open.

Voice activation (VOX)

Simply start talking, after some seconds the communication will be opened and

will remain active for the time you are talking. If there is no conversation the

intercom will be closed after 40 seconds. If needed you can close the intercom

manually without waiting 40 seconds (just press the middle button).

If needed, you can temporarily disable the VOX feature simply by pressing the

Backward button for 7 sec. Two sound beep will advise you when the VOX is di-

sabled. To turn the VOX on again, just press the same button, one beep sound

will advise you that the VOX is now active (or just turn the unit oﬀ and on again).

Adjusting the volume

Your Midland BTX1 uses AGC technology, which automatically adjusts the liste-

ning volume in relation to background noises.

However, it is also possible to manually adjust the volume by means of the “Volu-

me +” and “Volume -“buttons.

Attention: volume can be adjust only when an audio connection is active.

Attention: the volume buttons (Vol + and Vol -) cannot be used to adjust the vo-

lume of the wired audio source. The AGC system with automatically increase the

volume on higher speed.

How to pair the BTX1 to Midland BT line units

The BTX1 is compatible with all the BT line unit from Midland. You can pair the

BTX1 to a BT2, BT1 or BTX2 unit and the max distance of the intercom is deﬁned

from the lower possible.

To pair the BTX1 to another BT line unit, you must ﬁrst enter the setup mode:

1. Turn oﬀ the unit

2. Press and hold down the Middle button about 7 sec., until the Red light is on

permanently.

3. Now press long (3 sec) the Middle buttonich button, the Blue and Red light

will ﬂash.

4. Follow the procedure on the other unit’s instruction manual (normally you can

use the “Volume +” button on all the previous BT line units).

5. When successfully paired, each unit will have the Blue light on for one second

and than go back to the setup mode (Red light always on).

Exit the setup mode from both units before you can use them: for BTX1 double

click on the Middle button, the Red light will turn oﬀ and the Blue light will start

ﬂashing. For the other devices of BT line, please refer to their own user manual.

A- Manual activation

Mode Forward button Middle button Rear button

Intercom Short press: Open/Close intercom to paired

raider

Long press: Change mode

Long press: Toggle on/oﬀ wired

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BTX1 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland BTX1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info