Bedienungsanleitung Midland BTX1 (Seite 20 von 111) (Holländisch, Portugiesisch, Finnisch)

494048

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

Midland BTX1 - 19

Vocally:

Simply say one word to answer the call and start talking.

Remembering that you can only do this if you answer the call after the third Ring.

Attention: be aware that some phones may not support voice answering

Manually:

Tap the “Forward” button and start speaking.

Rejecting a call in both Phone/Intercom mode

If you don’t wish to answer, you can let the mobile phone ring or press the “For-

ward” button for a few seconds (you will hear one audio conﬁrmation tone).

Making a call only in Phone mode

There are several ways to make a call.

From the mobile keypad:

Dial the number on the mobile keypad:

Press “Send” on the mobile phone.

To redial the last number:

Press “Forward” button for 3 seconds in order to redial the last number (you will

hear one audio conﬁrmation tone).

To make a voice call:

Brieﬂy press “Forward” button. If your mobile phone supports voice calls, you will

be asked to speak the name of the contact you wish to call.

Priority: Calls have a high priority, which means that all other communications are

temporarily disabled when a call arrives and automatically re-enabled once the call

ends.

Ending a callin both Phone/Intercom mode

There are several ways to end a call:

› Wait for the called person to end the call.

› Press the “Forward” button (you will hear an audio conﬁrmation tone).

› Press “End” button on the mobile phone.

Using the MP3 player feature of the mobile phone only in Phone mode

Many mobile phones are now designed to be used as stereo MP3 players. The

BTX1 device fully supports the A2DP and AVRCP protocols that enable you to listen

to stereo music and remotely control your mobile phone’s MP3 player. You can

even use the buttons on the BTX1 unit to control the following play options: Play,

Pause, Forward and Backward.

Available controls:

› To play/pause music: click on the “Middle” button.

› To skip forward to the next song: press the “Forward” button.

› To skip backwards to the previous song: press the “Rear” button..

Priority: the music listening mode has the lowest priority. Therefore, it will always

be disabled when another type of communication is enabled.

How to pair the BTX1 to a GPS

In general is possible to pair the BTX1 to all the GPS for motorbike that support

Bluetooth headset connection.

To pair the BTX1 to a GPS, you must ﬁrst enter the setup mode:

1. Turn oﬀ the unit

2. Press and hold down the “Middle” button about 7 sec., until the Red light is

on permanently.

3. Now press ﬁrmly (3 sec) the “Volume +” button, the Blue and Red light will

ﬂash.

B-Phone mode

Mode Forward button Middle button Rear button

Phone Short press: Voice dial /accept or close if it is

in progress

Long press: redial last number/ or reject

incoming call

Long press: Change mode Long press: toggle on/oﬀ wired

Phone (when music play) Short press: Forward the song Short press: Play/pause

Long press: Change mode

Short press: Backward the song

Play/PausaForward Backward

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BTX1 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Midland BTX1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info