Bedienungsanleitung Midland BTX2 FM (Seite 19 von 88) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

579660

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

18 - Midland BTX2 FM

To pair the BTX2 FM to another BTX2 FM unit, you must ﬁrst enter the setup mode:

1. Turn oﬀ the unit

2. Press and hold down the middle button about 7 sec., until the Red light is

on permanently.

3. Now press the Middle or the Backward button for 3 seconds. The Blue and Red

light will ﬂash.

4. Do the same procedure on the other unit, When successfully paired, each

unit will have the Blue light on for one second and than go back to the setup

mode (Red light always on).

5. Now the pairing procedure is complete, you just need to exit the setup

mode before you can use the units:

Double click on the Middle button, the Red light will turn oﬀ and the

Blue light will start ﬂashing.

You can use now your BTX2 FM.

Unit already busy

If you try to open a intercom connection to another person that is already busy

talking with some one else (or is in a middle of a phone conversation), you will

hear a “busy” double beep tone. Just wait sometime and try again, maybe this

time the “line” is not busy.

The person who is called, will be advised that someone is trying to call and will

hear a voice announcement with the number of the button from which the re-

quest is coming.

Talk 2 All - Pairing to a diﬀerent brand intercom

Thanks to the “Talk2 All - Universal Intercom” feature it is now possible to pair your BTX2

FM to a diﬀerent brand intercom available on the market, using “Forward button”

1. On the BTX2 FM enter the setup mode: (With the unit OFF press and hold down the

Middle button about 7 sec., until the Red light is on permanently.

2. Press the “Forward” button for 3 seconds, the Red and Blu LED light will ﬂash.

3. On the other intercom (not Midland brand) follow the procedure to pair to a phone.

Attention: remember to switch oﬀ all the other Bluetooth device, only the two

devices involved in the pairing must be turned on.

If successfully paired the red/blue light will stop ﬂashing and the blu light will

slowly ﬂash instead.

To open the intercom communication on the BTX2 FM press forward button.

On the other intercom just press the phone redial button.

Maybe it will be necessary to press the dial button two times, depending on the model

of the not Midland intercom.

Attention: when using this conﬁguration, the other intercom (not Midland brand) will

not be able to be paired to a phone.

Pairing the BTX2 FM to Bluetooth devices

The BTX2 FM unit can be paired to other Bluetooth devices, like Phone, GPS Navi-

gator or PMR446 Radio with built-in or external Bluetooth (dongle). The pairing

procedure must be done using the “Volume +” or the “Volume -“ buttons.

› Pairing to the “Volume +” button: for Phone with music A2DP stereo, GPS Na-

vigator with A2DP audio or external mono/Stereo A2DP dongle.

› All devices paired to “Volume +” button has higher priority and will interrupt

all the other communication (like Intercom, FM Radio and Music).

› Pairing to the “Volume -” button: for a second phone with mono audio (Hands

Free Protocol) for GPS navigators/ Radar detector and other devices which

mono audio.

Talk2All - Universal Intercom

Dispositivo non Midland

Driver 1

Driver 2

Passennger 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland BTX2 FM Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info