Bedienungsanleitung Midland BTX2 PRO 2020 (Seite 11 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

738681

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

2 www.midlandeurope.com www.midlandeurope.com 3

MIDLAND BTX2 PRO

Multi rider intercom system

Midland BTX2 PRO is an intercom system solution with conference communication for

motor cyclists.The design is very slim and aerodynamic, all the main functions are easy

to operate thanks to the three big buttons placed on the front of the unit. Midland BTX2

PRO is ﬁxed on the helmet using the adhesive plate or the screw mounting clamp. Thanks

to the audio kit with ultra slim speakers you can enjoy high quality stereo music while

riding.

Main features

› Intercom “one to one” up to 1 Km distance.

› Conference 4 people

› Connect up to 4 people for “one to one” intercom communication

› Talk2All feature to connect other brand intercom

› FM Radio Stereo with RDS

› Music Share (Driver and Passenger)

› Connect your phone to receive and place phone call and listen to stereo music

› Support for 2 phones

› Connect your GPS for voice street indications

› Connection for PMR466 radio with internal or external Bluetooth

› AUX wired connection for MP3 player (optional cable)

› Setup and Firmware update via USB connection to a PC

Midland BTX2 PRO is available in two versions:

› Single Midland BTX2 PRO Intercom kit with one unit only

› Twin Midland BTX2 PRO Intercom kit with with two units

Depending on the model purchased, the package contains the following parts:

Midland BTX2 PRO single

› 1 BTX2 PRO communication unit

› 1 Slide-in mounting kit with two Hi-Fi stereo speakers

› 1 microphone with boom and 1 wired microphone

› 1 plate with bi-adhesive strip to ﬁx the unit onto the helmet

› 1 USB cable

Midland BTX2 PRO Twin

› 2 BTX2 PRO communication units

› 2 Slide-in mounting kit with two Hi-Fi stereo speakers

› 2 microphones with boom and 2 wired microphones

› 2 plates with bi-adhesive strip to ﬁx the unit onto the helmet

› 1 USB cable with with double plug

The units included in the TWIN kit are already paired on Middle button and therefore can

be immediately used in Intercom mode.

Technical speciﬁcations of Midland BTX2 PRO

General:

› Bluetooth ver. 4.2 Stereo (Handsfree/A2DP/AVRCP protocol)

› Frequency: 2.4 GHz - Max power 100mW

› AGC system automatically controls the volume in relation to background noise

› Voice (VOX) or manual communications activation

› Manual controls to enable: telephone, intercom and wire connection

› Fully waterproof

› Lithium battery with 30 hours talk time

› Recharge time: app. 2 hours

Bluetooth connections:

With identical device for Rider to Pillion or Bike-to-Bike Intercom mode, up to a ma-

ximum distance range of 1Km without obstructions and interferences (the riders must

be always in sight).

Bluetooth devices:

› Mobile phone with MP3 player Stereo (A2DP protocol) and GPS navigator

› PMR446 transceivers (with built-in or external Bluetooth connection) for group

bike-to-bike communications

Wire connections:

› For stereo audio input like iPod/MP3 player (with optional cable)

Attention: Midland BTX2 PRO is designed to withstand rain and water. However, if it is

raining, always verify that the rubber cap protecting the recharging sockets is fully ﬁtted.

Charging batteries

Attention: Make sure that the unit is fully charged before use. Allow at least 3 hours for a

full charge before using the unit for the ﬁrst time.

Charge the unit by inserting the wall-charger into the charging socket (lift the rubber

cover to insert the plug). The red LED on the unit will start ﬂashing when charging

begins.

Allow the headset to charge until the unit stops ﬂashing or the blue LED turns on.

When the charge is complete (the red LED is not ﬂashing), release the headset from

the charger. Normally, after the ﬁrst time, it takes 2 hours for a full charge.

Attention: every time the micro USB recharging plug is inserted (or detached), the device

is automatically turned o. To use it while it is in charge, you should turn the device on

with the plug already inserted.

Unit and ﬁxing system description

BTX2 PRO description

The BTX2 PRO has ﬁve buttons on the front; the main three big buttons are multi

functions buttons: the Forward (on the left), the middle button and the Backward (on

the right), the two squared buttons are the Volume + and Volume -.

LED

Middle

Volume - Volume +

Forward Backward

Description of the wired connections

On the bottom of the unit you can ﬁnd the Charger jack that enables to recharge the

unit using a standard microUSB power supply

The same micro USB charger plug can be used to connect an audio source, like a stereo

iPod/MP3 player;

Attention: you need an optional AUX cable not included in the box.

Charger plug

Description of the audio kit

The audio system includes two ultra-ﬂat stereo speakers and two interchangeable

microphones, which are both supplied with a bracket and wired connection. The mini

connector on the microphone allows you to choose the microphone that best suits the

helmet you are using.

Fixing the stereo speakers

The two stereo speakers have a Velcro/adhesive strip that aids their ﬁxing into your

helmet. Beware not to completely cover your ear with the speakers, you must always

be able to listen to the trac sound and your indicators.

The microphone can be ﬁxed onto the helmet in two ways:

Boom Microphone

Place the section with the Velcro/adhesive strip between the padding and the rigid co-

ver of the helmet, so that the microphone is correctly positioned in front of your mouth

Midland BTX2 PRO 2020 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info