Bedienungsanleitung Midland BTX2 PRO 2020 (Seite 12 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

738681

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

4 www.midlandeurope.com www.midlandeurope.com 5

and that the white symbol is facing your mouth. This type of microphone is suited for

Open Faced and Flip Front helmets.

Wired microphone

Using the Velcro/adhesive strip, place the microphone inside the helmet in front of

your mouth. This type of microphone is more suited for Full Faced helmets. The mini

connector on the microphone allows you choose the microphone that best suits the

helmet you are using.

Description of the Slide-in mounting kit

To ﬁx the Midland BTX2 PRO onto the helmet, you have to install the slide-in moun-

ting kit by using the plate with bi-adhesive strip. This method allows you to safely “ﬁx”

the BTX2 PRO unit onto your helmet and to remove it at any time in order to recharge

or store it.

Plate with bi-adhesive strip

The Bi-adhesive plate is already assembled on the slide-in mounting kit.

Clean the application area on the helmet surface, remove the bi-adhesive ﬁlm and pla-

ce the ﬁxing plate on the left side of the helmet by keeping it contact with the surface

for a few seconds.

Fitting and removing your Midland BTX2 PRO

The BTX2 PRO can be easily ﬁtted onto the helmet by sliding it downwards on the sli-

ding mounting kit. BTX2 PRO is maintained in position thanks to the ﬁxing clip located

on the upper section (A). To detach the BTX2 PRO, simply press the ﬁxing clip and

push the unit upwards.

UnlockLock

Switching ON and OFF your Midland BTX2 PRO

Switching the unit on:

Press and hold “Middle” button for approximately 3 seconds until the BLUE indicator

lights.

Switching the unit o:

Press and hold both “Middle” and “Backward” buttons together for approximately 3

seconds until the RED indicator ﬂashes 3 times, thus lessening the chances that you

might turn o the unit accidentally (especially whilst wearing gloves).

Bi-adhesive

Operative “mode”

The BTX2 PRO can operate in three main “mode”: Intercom, Phone and FM Radio.

The 3 multi function buttons can have dierent functionality depending on which mode

the unit is at that moment.

› In “Intercom mode” the three buttons let you manage the Intercom communica-

tions between driver and passenger or bike to bike.

› In “Phone mode” you can manage your Bluetooth mobile phone to place/answer a

phone call or to listen to the music or GPS App. announcement (in stereo mode).

Please use your phone responsibly and safely.

› In “FM Radio mode” you can listen to your favourite radio station in stereo, seek for

a speciﬁc radio station and save it (6 memories are available).

You can switch (toggle) from one mode to the other simply pressing the Middle button

for 3 seconds. A voice announcement will tell in which mode you are on.

The toggle sequence is the following:

› Intercom mode (if another unit has been paired)

› FM Radio

› Phone mode (if a phone has been paired)

Every time you turn on the unit, the default mode is the last used mode.

The Intercom mode and Phone mode are avalaible only if it was previously paired to

another unit or to a phone.

If you need to know in which mode the unit currently is, just press the “Volume + “ and

“Volume –“ buttons together. A voice announcement will tell you the current mode.

Maximum Distance

You can reach 1 Km intercom distance if you are in line of sight without obstructions

and interferences (the riders must be always in sight).

How to pair two Midland BTX2 PRO units

The two units supplied in the same Midland BTX2 PRO box, are already paired and re-

ady to use, which mean you don’t need to perform this procedure. The units are already

paired using the Middle button. If the devices are not part of the same kit, or the units

have been purchased separately, you need to ﬁrst pair it in order to use it.

To pair the Midland BTX2 PRO to another Midland BTX2 PRO unit

To pair the Midland BTX2 PRO to another Midland BTX2 PRO unit, you must ﬁrst enter

the setup mode:

1. Turn o the unit

2. Press and hold down the middle button about 7 sec., until the Red light is on per-

manently.

3. Now press the Middle button for 3 seconds. The Blue and Red light will ﬂash.

4. Do the same procedure on the other unit. When successfully paired, each unit will

have the Blue light on for one second and then go back to the setup mode (Red

light always on).

5. Now the pairing procedure is complete, you just need to exit the setup mode before

you can use the units.

6. Double click on the Middle button, the Red light will turn o and the Blue light will

start ﬂashing.

You can use now your Midland BTX2 PRO

Attention: remember to switch o all the other Bluetooth device that are not part of the

pairing procedure, only the two devices involved in the pairing must be turned on.

How to use the Intercom with two units

To use the intercom feature, be sure that both units are turned on and correctly paired

together.

Manual activation

Press the Middle button on one of the two units in “Intercom” mode. Communication

is enabled and remains active until you press again the middle button. The intercom

need some seconds to activate, you will hear a beep tone when the intercom is open.

Midland BTX2 PRO 2020 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info