Bedienungsanleitung Midland BTX2 PRO 2020 (Seite 13 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

738681

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

6 www.midlandeurope.com www.midlandeurope.com 7

Voice activation (VOX)

Simply say something, after some seconds the communication will be opened and will

remain active for the time you are talking. If there is no conversation the intercom will

be closed after 40 seconds. If needed you can close the intercom manually without

waiting 40 seconds (just press the middle button).

If needed, you can disable the VOX feature simply by pressing the Backward button

for 7 sec. A voice announcement will advise you when the VOX is disabled. To turn the

VOX on again, just press the same button and a voice announcement will advise you

that the VOX is now active. This setting is remembered also if you turn o the unit.

Attention: The Voice activation (VOX) can open the intercom communication only to the

unit that was paired with the Middle button. If you choose to use a dierent button (Forward

or Backward ), you will be able to active the intercom only manually.

Adjusting the volume

Your Midland BTX2 PRO uses AGC technology, which automatically adjusts the liste-

ning volume in relation to background noises.

However, it is also possible to manually adjust the volume by means of the “Volume

+” and “Volume -“buttons. The volume setting is indipendent for each audio source:

intercom, stereo music, phone call, FM radio.

Attention: volume can be adjusted only when an audio connection is active.

Set up of the AGC system

To adjust the sensitivity of the AGC system you can use the ”BT UPDATER” Pc

Software or the smartphone “BT SET-APP” application. You can choose dierent set

up based on your motorbike type (naked, touring, sport) or if you are riding as a pas-

senger. You can disable the AGC system pressing “Volume +” and “Volume -” togheter

for 3 sec.

How to pair the Midland BTX2 PRO to more than two units

One Midland BTX2 PRO unit can be paired to maximum three other BT units, that

means four in total.

The Midland BTX2 PRO has three main buttons (Forward, Middle and Rear). It is up to

you which button use to pair and activate the “Intercom”, you are totally free to choose

the button you like more.

Rider 2

Passenger

Rider 1

Rider 3

The same button you will use to pair the unit will be also used to open/close the inter-

com communication. For example you can pair your passenger to the Middle button

and other motorbikers to the Backward and Forward button. Everytime you open the

“Intercom” connection to one person, the previous connection will be closed.

The connection is not a “chain”, when two persons are talking it is not possible to break

(interrupt) the communication by one of the other units.

Pair the Midland BTX2 PRO to another Midland BTX2 PRO unit

To pair the Midland BTX2 PRO to another Midland BTX2 PRO unit, you must ﬁrst

enter the setup mode:

1. Turn o the unit

2. Press and hold down the middle button about 7 sec., until the Red light is on per-

manently.

3. Now press the Middle or the Backward or the Forward button for 3 seconds. The

Blue and Red lights will ﬂash.

4. Do the same procedure on the other unit, when successfully paired, each unit will

have the Blue light on for one second and then go back to the setup mode (Red

light always on).

5. Now the pairing procedure is complete, you can go on pairing other units on die-

rent button or just exit the setup mode to start using the units:

6. Double click on the Middle button, the Red light will turn o and the Blue light will

start ﬂashing.

You can use now your BTX2PRO.

How to use the Intercom with more than two units

To use the intercom feature, be sure that all the units are turned on and correctly paired

together.

Manual activation in Intercom mode

Press the button corresponding to the unit you would like to communicate with. After

some seconds the intercom communication will open.

The communication remains active until you press again the same button. To quickly

open the intercom to another person, just press the button corresponding to the other

unit, the intercom will be automatically closed and the new connection will be opened.

Voice activation (VOX)

The voice activation feature can open the intercom only to the unit paired to the Midd-

le button. While no other communication is open, simply start talking and the commu-

nication will be opened and remain active for all the time you are talking. If there is no

conversation the intercom will be closed after 40 seconds. If needed you can close the

intercom manually without waiting 40 seconds, pressing the Middle button.

If needed, you can disable the VOX feature simply by pressing the Backward button

for 7 sec. A voice announcement will advise you when the VOX is disabled. To turn the

VOX on again, just press the same button and a voice announcement will advise you

that the VOX is now active. This setting is remembered also in you turn o the unit.

Hint: this feature is very useful when you have a speciﬁc person that you like to talk to more

often (for example your passenger). In this way you don’t need to press a button to open

the communication.

Unit already busy in a conversation

If you try to open an intercom connection to another person that is already talking with

some one else (or is in a middle of a phone conversation), you will hear a “busy” double

beep tone. Just wait sometime and try again, maybe this time the “line” is not busy.

The person who is called, will be advised that someone is trying to call and will hear a

voice announcement with the number of the button from which the request is coming.

In this way as soon as the ﬁrst conversation is over, the person can easily contact the

caller by opening the intercom of the speciﬁc button number (indicated by the voice

announcement).

123

Conference

The “Conference” mode allows the communication with four people simultaneously.

The Midland BTX2 PRO unit can work as usually, with “one to one” communication up

to 4 people (“classic” Intercom mode) or with 4 people conference intercom (Confe-

rence mode).

How to use the conference mode

First of all you need to pair all the units in a “chain” mode, second the “Conference”

feature must be active on all the units paired.

Pairing

To use the conference mode you need to pair all the units in a “chain” conﬁguration.

The BWD button of the ﬁrst unit must be paired to the FWD button of the second

unit. The BWD button of the second unit must be paired to the FWD button of the

third unit and so on, till the fourth!

123

The ﬁrst and the last unit must not be paired together (the chain must stay open).

The unit number 1 can talk to the last unit (number 4) only “through” the unit number

2 and number 3. That means to have the conference with four people, all the unit must

have the intercom open.

Midland BTX2 PRO 2020 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info