Bedienungsanleitung Midland BTX2 PRO 2020 (Seite 15 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

738681

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

10 www.midlandeurope.com www.midlandeurope.com 11

How to use a Phone

After pairing your phone to the Midland BTX2 PRO unit you must switch to the “Pho-

ne” mode in order to use it. Press the middle button until you hear “Phone” from the

voice announcement. Now all the three main buttons are dedicated to the phone (see

Table B)

Answering a call

When you hear the phone ring, you can answer in two dierent ways:

Vocally:

Simply say one word to answer the call and start talking.

Manually:

Tap the “Forward” button and start talking.

Rejecting a call

If you don’t wish to answer, you can let the mobile phone ring or press the “Forward”

button for 3 seconds (you will hear one audio conﬁrmation tone).

Making a call

There are several ways to make a call.

From the mobile keypad:

Dial the number on the mobile keypad:

Press “Send” on the mobile phone.

To redial the last number:

Phone on Vol+: Press“Forward”button for 3 seconds in order to redial the last number

(you will hear one audio conﬁrmation tone).

Phone on Vol-: Press“Backward”button for 3 seconds in order to redial the last number

(you will hear one audio conﬁrmation tone).

To make a voice call:

Phone on Vol+: Brieﬂy press“Forward”button. If your mobile phone supports voice calls,

you will be asked to speak the name of the contact you wish to call.

Phone on Vol-: Brieﬂy press“Backward”button. If your mobile phone supports voice

calls, you will be asked to speak the name of the contact you wish to call.

Priority: Calls have a high priority, which means that all other communications are tempo-

rarily disabled when a call arrives.

Ending a call

There are several ways to end a call:

› Wait for the called person to end the call.

› Press the “Forward” button (you will hear an audio conﬁrmation tone).

› Press “End” button on the mobile phone.

Speed dial

You can store one phone number in the unit memory and use it when needed. You

must ﬁrst save the number using the “BT updater” Pc software or the smartphone

“BT SET-APP” application. Then when you are in phone mode, just press 7 sec. the

“Forward” button.

Using the MP3 player feature of the mobile phone

The mobile phone, when paired on “Volume +” can be used as stereo MP3 players. The

Midland BTX2 PRO device fully supports the A2DP and AVRCP protocols that enable

you to listen to stereo music and remotely control your mobile phone’s MP3 player.

You can even use the buttons on the Midland BTX2 PRO unit to control the following

play options: Play, Pause, Forward and Backward the songs.

Play/PauseForward Backward

Available controls:

› To play/pause music: click on the “Middle” button.

› To skip forward to the next song: press the “Forward” button.

› To skip backwards to the previous song: press the “Back” button.

Priority: the music listening mode has the lowest priority. Therefore, it will always be di-

sabled when another audio communication come in.

To change the priority behaviour you can use the ”BT UPDATER” Pc Software or the

smartphone “BT SET-APP” application

Attention: It is possible to control A2DP Stereo music only in “Phone Mode”

Music Share

To start sharing your A2DP music with the passenger already paired on the middle

button (maximum distance 10mt), you must press the “Backward” button long (3 sec.)

while the music is playing. The passenger must be either in “Phone” or “Intercom” mode

without any open audio. The passenger can only stop the music share pressing short the

middle button (but cannot control the music). The driver can stop the music sharing

just pressing again the “Backward” button long. With music share active you can not

keep open the Intercom communication.

GPS Navigator

The GPS Navigator can be paired using the “Volume+” or the “Volume-“ button.

› Volume + button (support for stereo A2DP audio and HFP mono). If the audio of

the Navigator street indication is stereo (like when you are using a smartphone with

a navigation app), you must pair it on the “Vol+” button.

› Volume - button (support for HFP mono audio also in background). If the audio of

the Navigator street indication is mono you can pair it on the “Vol-” button. If the

“Background” feature is activated, the street indication are always in background

and will not interrupt the Intercom communication.

Attention: we can not guarantee the correct functionality of the background feature, be-

cause it is depending on third part device

In case the GPS Navigator can support a phone directly connect to it self, we suggest

to connect the phone to the Navigator and the Navigator to the Vol+ button.

GPS Stereo (A2DP) voice announcement

Midland BTX2 PRO supports Stereo (A2DP) voice announcement from GPS Na-

vigators or smartphone application when paired on “Vol+” button. When a voice an-

nouncement “brake in”, Intercom or FM radio is interrupted to give priority to the

announcement itself. By default this feature is ON; it’s possible to change the priority

using the “BT Updater” PC Software or BT SET-APP smartphone application.

GPS Navigator with stereo music player

If the GPS is also a stereo MP3 player and you want to listen to stereo music, you must

pair the GPS to the “Volume +” button. In this conﬁguration the GPS street voice

announcements will interrupt all other communications (Intercom, FM Radio, Music).

When the GPS is paired to the “Volume +” button the “Phone” mode is activated.

Attention: It is possible to control A2DP Stereo music from the GPS only in “Phone Mode”.

How to pair the Midland BTX2 PRO to a GPS

In general it is possible to pair the Midland BTX2 PRO to all the GPS for motorbike

that support Bluetooth headset connection.

To pair the Midland BTX2 PRO to a GPS, you must ﬁrst enter the setup mode:

1. Turn o the unit

2. Press and hold down the “Middle” button about 7 sec., until the Red light is on per-

manently.

B-Phone mode

Mode Forward button (Phone on Vol+) Middle button Backward button (Phone on Vol-)

Phone Short press: Voice dial /accept or close if it is in

progress

Long press: redial last number/ or reject

Long press: Change mode Short press: Voice dial /accept or close if it

is in progress

Long press: redial last number/ or reject

Phone (when music is plaing and paired on “Vol +”)Short press: Forward the song Short press: Play/pause

Long press: Change mode Short press:

Backward the song

Midland BTX2 PRO 2020 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info