Bedienungsanleitung Midland G12 (Seite 21 von 32) (Englisch)

543256

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English

6.3 Scanning of favourite channels

MIDLAND G12 can automatically search for signals on the favourite

channelsbyscanning,i.e.selectingthechannelsinrapidsequence.

When asignal isdetected, the scanning pauses onthat channel

andremainsblockeduntilthesignalends(foramaximumofve

seconds),givingtheuserachancetorespondtoacall,ifnecessary,

before MIDLAND G12 automatically begins scanning again.

Follow the steps outlined below to select the channels you want to

scan.

6.3.a Selection of channels to be scanned

1) Repeatedly press the

MENU button until the icon and the

currentlyselectedchannelbeginashingonthedisplay.

2) Pressthe

+ or – button to select the channel which you want to

scan

3) Press

SCAN/MON button to toggle the signs on the right of the

channel between

N(donotscanchannel)toY(scanchannel)

4) Repeatsteps2and3soastoselectatleasttwochannelsfor

scanning(itwouldnotmakesensetoselectonechannelonly).

5) Pressthe

PTTbuttontoescape,orwaitforafewseconds.The

device will go back to standby mode having memorized the

chosen settings.

In order to deselect one or more channels from the scanning process

repeat the above steps making sure that all channels to be excluded

are marked with

6.3.b Scanning

1) Makesureyouhaveselectedatleasttwochannelsasdescribed

above

2) PresstheSCAN/MON button to begin scanning on the chosen

channels. On the display the

iconwillash.

Ifyouanswertoacallwhilescanningisinprogress,MIDLAND G12

will wait forve secondsafter your transmission(to giveyou the

chanceofhearingthereplayofotherparty),thenitwillstartscanning

again.

To disable scanning press again the

SCAN/MON button. The icon

will disappear from the display and the transceiver will go back to

standby mode on the channel the radio was tuned before scanning

started.

6.3.c Further operations during scanning

Scanning

occasionally stops to allow you to hear communication. If

thisturnsouttobeofnointerestforyou,scanningcanstartagain

manually if you press the

Moreover,shouldscanningstop

repeatedly on conversation which

isofnointeresttoyou,youcanexcludethechanneltemporarilyout

of scanning by pressing the

– button. The channel will be excluded

by the scanning function until you stop scanning. The channel will

be included again the next time you start scanning as explained in

par. 6.3.b.

2 If the current channel is also the one from which you have started

scanning, the – button has no effect on the temporary exclusion

from scanning of this channel. This is because the channel in

question is considered to be in a position of priority. If, for example,

you have select channels 1,3 and 5 to be scanned and channel

one is selected when you start scanning the – button will only

work for channels 3 and 5.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland G12 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info